• Genuine replacement thermostat bimetal for your Whirlpool fridge freezer.

Suitable for the following models- Whirlpool ARC7451, ARC7451/1, ARC7453, ARC7453/1, ARC7453/1IS, ARC7453/1NBS, ARC7453/IS, ARC7517, ARC7517/IS, ARC7518, ARC7518/IX, ARC7518IS, ARC7518IX, ARC7558/IXAQUA, ARC7559IXAQUA, ARC7593, ARC7593/1, ARC7593/1IS, ARC7593/IS, ARC8009IX

 

Applications 
- Refrigerator 
- Electrical Blanket 
- Showcase 
- Ice Machine 
- Electrical Stove 

Features 
- Ultra slim type 
- Ideal for where space is premium   
- Plastic seal available for hermetic protection   
- Leadwire and terminal can be attached upon order   
- Double contacts for extra reliability 
- UL, VDE and TUV certificated
- Environmental friendly towards RoHS, REACH

 

Open temperature: 8C, Close temperature: -7C. + Fuse 66'C

 

Use	Temperature control/Overheat protection
Reset type	Automatic
Base material	resist heat resin base
Electrical Rating	15A / 125VAC, 7.5A / 250VAC
Max. Operating Temperature	150°C
Min. Operating Temperature	-20°C
Tolerance	+/-5 C for open action(Optional +/-3 C or less)
Protection class	IP68
Contact material	Solid Silver
Dielectric Strength	AC 1500V for 1 minute or AC 1800V for 1 second
InsulationResistance	More than 100MW at DC 500V by Mega Ohm tester
Resistance Between Terminals	Less than 100mW
Diameter of bimetal disc	Φ12.8mm(1/2″)
Approvals	UL/ TUV/ VDE/ CQC
Terminal type	Customized
Cover/Bracket	Customized

 

 

 

 

 

 

 

 

 

Automatic Reset: A thermostat that automatically resets to its pre-trip contact configuration at a factory preset temperature.

 

Bimetal:  Two metals with different rates of expansion molecularly bonded together to form a blade or disc for a thermostat.

 

Differential: (also known as Hysterisis) Refers to the difference between the opening and closing temperatures of a thermostat.

 

Maximum Temperature:  (TM or Tm)  In reference to a thermal cutoff, the maximum temperature to which the device can be subjected for a period of ten minutes without resuming conductivity once it has opened.

 

Minimum Differential: (also known as deadband) The minimum number of degrees between the actual open and actual close temperatures.

 

Normally Closed: Contacts open on temperature rise.

 

Normally Open: Contacts close on temperature rise.

 

S.P.D.T. (Single Pole/Double Throw): A three terminal switch possessing both Normally Open and a Normally Closed contact configuration.

 

S.P.S.T. (Single Pole/Single Throw): A switch with a single set of terminals and a single set of contacts.

 

Snap Action Thermostat: A thermostat with a Bimetal element that snaps to close the contacts when the activation condition is experienced. This construction permits the clean break of loads.

 

Thermal Cutoff: A thermal cutoff is an electrical safety device that interrupts electric current when heated to a specific temperature.

 

Tolerance: The allowable range above and below a nominal temperature.