Specifications of double girder steel melting planet crane

1 Lifting capacity: 2-10t
2.Span: 9-20m
3.Lifting height: 3-60m

4.ISO, CE certificated, top quality

 

Brief introduction of double girder steel melting planet crane

LDY double girder steel melting planet crane is mainly used for lifting molten metal and foundry location. Its configured lifting mechanism is modle YH electric hoist for metallurgy, hoisting capacity is no more than 10ton. Main girder bottom of crane adopts to specail heat insulation disposal. Working environment temperature is-10°c~60°c, relative humidity is <50% in 40 °c. Design and manufactured of crane meet the requirments of AQSIQ Doc(2007)375. Other situations that lift fusion non-metallic material or hot solid metal can refer.

 

Functions of double girder steel melting planet crane

1. The mechanisms can be speed governing(1:10 or larger)

2. The lifting appliances are rotable

3. The spacing or portal hook is variable

4. Limit and warning for over load

5. Weighting and diapaly of load, PLC control and failure detection, dispaly, record and printing system

6. Prevent collision between cranes of same span.   

 

Technical parameters of double girder steel melting planet crane                         

Lifting capacity (t)	2-10
Span (m)	7.7-28.5
Crane travelling mechanism	Travelling speed		20	30
	Speed ratio		58.95	39.42
	motor	Type	Cone squirrel-cage
		Power (kw)	0.8x2  1.5x2
		Rotational speed(r/min)	1380
Lifting mechanism (electric hoist)&electric hoist travelling mechanism	Model of electric hoist		YH model
	Lifting speed		8   7
	Lifting height		9 12 15 18 20
	Travelling speed		20
	motor		Cone squirrel-cage model
Working system	Intermediate Jc=25%
Electric current	380V  50Hz  three-phase
Wheel diameter	270mm  400mm
Width of trail	37-70

   Attention: The above is standard, if it can not meet your requirments, pls tell us. Our products are customized.

 

Notes for the buyers

1.What is your lifting capacity?

2.What do you want to lift?

3.The span length(the distance between the two rails)?

4.Working frequenc is heavy or light?

5.What is your working power supply?

6.It is better to provide drawing.