| Power Source: | Electric |
|---|---|
| Type: | Cordless Gun |
| Model Number: | BC-1411-310ml |
| Brand Name: | BC |
| Place of Origin: | China (Mainland) |
| Power Source: | Electric |
| Battery: | Ni-cd 1300mAh |
| Charging Time: | 3 to 5 hours |
| Duration Time: | 3 to 4 hours |
| Gun Working Power: | Electric |
| Gun Barrel Length: | 230mm |
| Caulking Speed: | 15-160mm/min |
| Gun End Caps: | Metal |
| Charge power source: | AC230V, 50Hz |
| Quality Control: | Individually Tested |
Quick Details
Specifications
* Charge power source: AC230V, 50Hz
* Voltage: 12V
* Battery: Ni-CD 1300mAh, not Li-ion battery.
* Charging time: 3-5 hours
* Duration time: 3-4 hours
* Full 310ml cartridge use only;
* Gun body colour: As the picture showing
* Caulking speed: 15-160mm/min
* Thrust: 50KG(490kgf)
*Kindly noted that the packing is each gun in one plastic tool box as picture showing;
Instructions:
1,before using for first time, battery must be charged for 3 to 5 hours. Battery-charging must not exceed 5 hours. Insert battery in charger and switch on.The red LED indicator will light up. When fully charged,remove battery and replace in gun. Check that it is correctly fitted. The battery will not achieve full power until it has been recharged several times. To achieve best battery performance,allow battery to discharge completely before recharging.
2,for cartridge use.
3,for low and medium viscoisty sealant use.
Use:
Remove seal from grout/filler/seal tube and fit conical applicator that comes with it. Cut applicator to size.
Remove chamber(2) from gun. Press lock button(5) to left and gently puch piston(3) into gun. Insert tube into chamber and screw chamber into gun. Press lock button to right to lock piston.
Set speed selector(6) to lowest setting.
Press trigger(4) until grount/seal/filler emerges from tube nozzle. Adjust flow speed using speed selector.
Speed and width of grount/seal/filler depends on consistency,temperature and width of opening in applicator. If applicator hole is small,do not set speed too high to prevent grount/seal/filler being forced out of base.
Release trigger to stop.
If motor or gear sound strained,stop use. Check applicator hole is big enough and that base of tube is not blocked. Remedy problem before continuing use.
Cleaning:
Wipe regularly with a dry cloth.
Never use corrosive or abrasive cleaning agents as they may attack plastic parts.