1.Application:

This model is compact design, mature technology, reasonable structure, stable operation, high quality, energy efficient, by all kinds of customers, can be widely used in various types of soft / hard-conductor wire (copper wire, enameled wire, tinned wire, copper Steel, copper clad aluminum, etc.) and electronic wire stranding, such as: photovoltaic cable, power cable, telephone cable, audio cable, video cable, automotive cable, network wire etc..

2. Technique Feature:

1. The maximum spindle speed of 1800rpm.
2. Automatic tension control: When stranded, closing line from the bottom of the pan when you receive full plate up tension increasing demand, this function automatically tracking adjustment up tension; so that the entire dish up tension uniform, while the machine can not down to adjust the tension.
3. Host for grease lubrication, effectively extending the service life of the spindle bearings. Over the line system using the new structure, the wire from the spindle guide wheel directly over the line to the bow belt, minus the scratches and jump Shares phenomenon corner guide wheel failure due to the aluminum plate on which caused.
4. Machine equipped with three squeeze device to ensure roundness conductor stranded after reducing the loss of insulating materials.
5. Machine with belt drive, no lubrication points in the machine, to keep the machine clean, stranding no oil, adapt to various types of surface cleanliness require a higher kind of conductor strands.
6. Adjustment twisted away from simply replacing a lead to take the wheel, adjust the cutter to just flip reversing lever, simple to operate, thereby reducing the error rate and the intensity of the operator's work. ? machine bearings are used in Japan known brands, bow with the use of new materials, flexible, and avoid jumping stocks caused by vibration during high-speed operation, the inverter, PLC, magnetic clutch, electromagnetic brake, hydraulic jacks all imported famous brand, reduce the failure rate and maintenance costs.

[Technique specifications]:

specification	TF-630P
application	Adapt to the bare wire,tinned wire,copper ciad aluminum wire,enameled wire,alloy wire to be stranded
speed	1800r/min
Wire dia	φ0.23-φ0.64mm
Sectional area	0.8-6.0mm
lay	11.15～60.24mm
Take up	Φ630mm×380mm×80mm(according to your drawing )
motor	10HPmotor and inverter
Size	2850*1500*1660
Twist distance	S/Z commutation can be chosen arbitrarily,ajust the direction of lay is wrenched by hand traverse is reversing rod,simple operation
Cable	Bearing type cable,row,row spacing can be adjusted
Brake	The electromagnetic brake,internal and external disconnection,automatic braking to meter
Tension control	The magnetic powder clutch control thread tension,by PLC programmable controller automatic tracking adjusting the tension,tension constant