The 50V00 Series V-type regulating ball valve adopts the equal percentage V-type cut on the specially designed spherical surface, so that it has relatively high adjustable ratio in addition to good control performance. During the action process of the plug, effective shearing can be formed between the V-type cut on the spherical surface and the seat. Assisted by the straight-through flow channel, the valve is very suitable for controlling fibrous media, pulps, powders and other fluids, gases and vapors.

The V-type spherical surface after special treatment can realize continuous and stable action without obstruction. The sealing performance of the valve can be checked just after removing the seat and its supporting rings, so that the maintenance becomes very fast and simple. The body connection types such as clamping type and flange type are available for selection.

Parameters of control valves:

Trim features:	V-type ball
Body type:	straight-through type
Bonnet type:	standard integral type
Flow characteristic:	approximately equal percentage
Size:	DN15-300(1/2" -12" )
Pressure class:	PN1.6, 4.0, 6.3Mpa(ANSI 150, 300, 600LB)
Leakage class:	ASME B16.104 Ⅳ( metal seat) ASME B16.104 Ⅵ(soft seal seat)
Pipe connection type:	wafer type , flange type
Applicable temperature range:	-30° ~ 550°
Actuator type:	pneumatic piston actuator electric actuator worm gear hand operating