SAE 1010 steel under ASTM - SAE standard. Its grade number is 1.0332. About SAE 1010 steel detail information, please refer to technical date in following.
SAE 1010 steel equal material: DIN 1614 STW22, NFA 36-301 1C, UNI5867 FEP11, BS1449 HR3,UNE36.093  AP11, EN 10111 DD11,JIS G 3131 SPHD.
SAE 1010 steel size offered by us:
SAE 1010  Round bar diameter: 1mm-2000mm
SAE 1010  Square bar size: 50mm * 50mm-600mm *600mm
SAE 1010  Plate steel/flat bar size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
SAE 1010  Tube/pipe size: OD: 6-219mm WT: 1-35 mm.
SAE 1010  Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
SAE 1010  Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
SAE 1010 steel chemical composition:
C=0.10%, Mn=0.45%, P=0.04% max, S=0.05% max
SAE 1010 steel mechanical property :
Tensile Strength:195~1130
Yield Strength:175~980
Extension:6%~24%
Reduction of cross-section:30%~70%
Impact absorbing energy:31~71
Hardness (HBS):131~285
SAE 1010 steel heat treatment: This steel is generally used in the annealed or case hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.
SAE 1010 steel finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement.
SAE 1010 steel surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement.