Duct Rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-saving reducing effort, improving efficiency, etc ,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put. when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe; When arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable.
Our factory is China's largest producer of Duct Rodder.We produce Duct Rodder has 15 years of history, we have the advanced production equipment and production technology. Our Duct Rodder are exported to more than 60 countries,and many Asia countries has agency.
Fiberglass duct rodder features&benefits:
1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling
7. Anticorrosion ,good elasticity,long working life.
Specifications
1.Fiberglass hose is lightweight and non-conductive, Because of the extreme flexibility, it can be used as push-pull rodder .
2.Fiberglass push pull,Fiber snake duct rodder,cable rods
3.Fiberglass hose is lightweight and non-conductive, because of the extreme flexibility, it can be used as push-pull rodder in cable installation, and in conduit which makes it very versatile
|
Property |
value |
|
Model specification |
4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order |
|
Length |
30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. |
|
Material |
Fiberglass (inner) and high density polytgtkebe(outer) |
|
Density |
>1.9gr/cm3 |
|
Working temperature |
- 40 to + 80 |
|
Minimum pulling strength |
4000 N±5% |
|
Tensile Modulus |
>46.500Mpa |
|
Consistency of rod |
137gr/m |
|
Flexural Modulus |
>46.500Mpa |
|
Elongation at Break |
2.5-3% |
|
Min. Bending Radius |
388m |
|
Tensile Strength |
>15N/mm2 |
|
Environmental Stress & Crack Resistance |
>1000hr |