1. Features

① Circuit board cutting knife and the six , two of a group of vertical , constituting a cutting unit . Reduce time off mode: the entire cutting process is divided into three stages, due to the small amount of each cut , so the stress generated in the process of cutting more traditional ( take the knife scoreboard running board scoreboard pneumatic scoreboard as ) more than 80% , dividing good smooth edge of the board , the board is very flat, not twisted not Alice .

② unique limit device , enabling employees to operate more convenient, faster and more efficient scoreboard speed , no training to operate.

③ blade fitted with transparent plexiglass pinch hand , saw blade running at the same time , they effectively eliminate the accident .

④ unique times cutting mode , making the cutting process is very smooth , greatly improving the positioning capability V groove, even cut very shallow V-groove boards , cases of bias will not appear , avoid scrap board.

⑤ As the scoreboard force on each blade is small, so that the lower blade wear , increase the life of the blade , reducing the cost.

⑥ The product is suitable for dividing LED aluminum plate (unlimited length ) as the market generally 400MM 600MM 800MM 1200MM 1500MM length , PCB board. Copper substrate strip wave MDF board FR-4 and so on . 

2. Technical parameters

1. Product Name : JYVC-LS aluminum plate scoreboard

   2. Operating temperature :10-35 ℃

   3. Of thickness :0.5-3MM

   4. Scoreboard speed :0-300MM / S

   5. Blade Material : SKH51

   6. Operating voltage : 220V 50HZ 40W

   7. Storage temperature : -20-50 ℃

   8. Aluminum plate Size : Open

   9. Being cut circuit board material: aluminum plate FR-4 wave fiber boards

   10. Machine Size : 300MM (L) * 280MM (W) * 200MM (H)

   11. Out trays installed after the machine size : 2400MM (L) * 430MM (W) * 200MM (H)

   12. V-CUT groove surrounding parts: the original height restriction <13MM, from the V-groove joints > 0.5MM

   13. Weight : 35KG