| Model Number: | 140h |
|---|---|
| Brand Name: | CAT |
| Place of Origin: | United States |
| Condition: | Used |
| Make: | Caterpillar |
| Year: | 2007 |
Quick Details
Specifications
140H Used Caterpillar Motor Grader
Brand: cat
Model: 140h
Year: 2007
Hours: 4100
original paint
very very good condition
located in shanghai
Take the chance to check it!
Specification Of 140H Caterpillar
Brand: cat
Model: 140h
Year: 2007
Hours: 4100
original paint
very very good condition
located in shanghai
Take the chance to check it!
Specification Of 140H Caterpillar
| Engine | ||
| Make | Caterpillar | |
| Model | 3176C DITA ATAAC VHP | |
| Net Power Gear 1-2 | 165 hp | 123 kw |
| Net Power Gear 3-4 | 185 hp | 138 kw |
| Power Measured @ | 2000 rpm | |
| Net Power Gear 5-6 | 185 hp | 138 kw |
| Number of Cylinders | 6 | |
| Net Power Gears 7-8 | 185 hp | 138 kw |
| Max Power | 185 hp | 138 kw |
| Displacement | 629 cu in | 10.3 L |
| Operational | ||
| Std Operation Weight - Front Axle | 9123 lb | 4138 kg |
| Std Operation Weight - Rear Axle | 23234 lb | 10539 kg |
| Std Operation Weight - Total | 32357 lb | 14677 kg |
| Max Operation Weight - Front Axle | 16733 lb | 7590 kg |
| Max Operation Weight - Rear Axle | 30139 lb | 13671 kg |
| Max Operation Weight - Total | 46872 lb | 21261 kg |
| Fuel Capacity | 105 gal | 397 L |
| Cooling System Fluid Capacity | 10 gal | 38 L |
| Hydrauilc System Fluid Capacity | 20.8 gal | 80 L |
| Rear Diff/Final Drive Fluid Capacity | 12.4 gal | 47 L |
| Circle Gearbox Fluid Capacity | 1.8 gal | 7 L |
| Tandem Case Fluid Capacity (each) | 16.9 gal | 64 L |
| Transmission | ||
| Type | direct drive, power shift | |
| Number of Gears - Forward | 8 | |
| Number of Gears - Reverse | 6 | |
| Max Speed - Forward | 27.4 mph | 44 km/h |
| Max Speed - Reverse | 21.6 mph | 34.7 km/h |
| Steering | ||
| Articulation L/R | 20 degrees | |
| Turning Radius | 24.6 ft in | 7.5 m |
| Front Axle | ||
| Wheel Lean | 18 degrees | |
| Oscillation - Total | 32 degrees | |
| Ground Clearance | 2 ft in | 600 mm |
| Hydraulic System | ||
| Pump Type | axial piston | |
| Pump Flow | 54.4 gal/min | 206 L/min |
| Relief Valve Pressure | 3500 psi | 24150 kPa |
| Moldboard | ||
| Moldboard Width | 12 ft in | 3658 mm |
| Moldboard Height | 24 in | 610 mm |
| Moldboard Thickness | 0.87 in | 22 mm |
| Max Depth of Cut | 28.1 in | 715 mm |
| Side Shift Left | 20.6 in | 524 mm |
| Side Shift Right | 26 in | 660 mm |
| Blade Pull at Max Weight | 42184 lb | 19135 kg |
| Blade Down Pressure | 28697.6 lb | 13017 kg |
| Circle | ||
| Diameter | 60.2 in | 1530 mm |
| Shift Left | 27.4 in | 695 mm |
| Shift Right | 28.7 in | 728 mm |
| Max Reach Outside Tires - Left | 74.6 in | 1896 mm |
| Max Reach Outside Tires - Right | 77.9 in | 1978 mm |
| Max Lift Above Ground | 18.9 in | 480 mm |
| Blade Tip Angle - Front | 40 degrees | |
| Blade Tip Angle - Rear | 5 degrees | |
| Dimensions | ||
| Height to Top of Cab | 10.3 ft in | 3131 mm |
| Overall Length | 28.6 ft in | 8713 mm |
| Width Over Tires | 8.1 ft in | 2464 mm |
| Wheelbase | 20.2 ft in | 6169 mm |
| Blade Base | 8.4 ft in | 2561 mm |
| Tandem Axle Wheelbase | 5 ft in | 1523 mm |
| Rear Ground Clearance | 1.1 ft in | 344 mm |
| Front Ground Clearance | 2 ft in | 600 mm |