| Model Number: | 12h |
|---|---|
| Brand Name: | CAT |
| Place of Origin: | United States |
| Condition: | Used |
| Make: | Caterpillar |
| Year: | 2007 |
Quick Details
Specifications
Used CAT Motor Grader 12H
Brand: Caterpillar
Model: 12h
Year: 2007
made in Brazil
Cabin, Air Condition
Operating Well
Excellent Condition
located in Shanghai
Specification
Brand: Caterpillar
Model: 12h
Year: 2007
made in Brazil
Cabin, Air Condition
Operating Well
Excellent Condition
located in Shanghai
Specification
| Engine | ||
| Make | Caterpillar | |
| Model | C-9 ETA VHP | |
| Net Power Gear 1-2 | 145 hp | 108 kw |
| Net Power Gear 3-4 | 165 hp | 123 kw |
| Power Measured @ | 2000 rpm | |
| Net Power Gear 5-6 | 165 hp | 123 kw |
| Number of Cylinders | 6 | |
| Net Power Gears 7-8 | 165 hp | 123 kw |
| Max Power | 165 hp | 123 kw |
| Displacement | 537 cu in | 8.8 L |
| Operational | ||
| Std Operation Weight - Front Axle | 8346 lb | 3784 kg |
| Std Operation Weight - Rear Axle | 22974 lb | 10416 kg |
| Std Operation Weight - Total | 31320 lb | 14200 kg |
| Max Operation Weight - Front Axle | 13744 lb | 6234 kg |
| Max Operation Weight - Rear Axle | 32074 lb | 14549 kg |
| Oil System Fluid Capacity | 7.1 gal | 27 L |
| Max Operation Weight - Total | 45818 lb | 20783 kg |
| Fuel Capacity | 100 gal | 378 L |
| Cooling System Fluid Capacity | 11.6 gal | 44 L |
| Hydrauilc System Fluid Capacity | 19.5 gal | 74 L |
| Rear Diff/Final Drive Fluid Capacity | 12.2 gal | 47 L |
| Circle Gearbox Fluid Capacity | 1.8 gal | 7 L |
| Tandem Case Fluid Capacity (each) | 16.9 gal | 64 L |
| Tire Size | 14.00-24 12PR | |
| Operating Voltage | 24 V | |
| Alternator Supplied Amperage | 75 amps | |
| Transmission | ||
| Type | direct drive power shift | |
| Number of Gears - Forward | 8 | |
| Number of Gears - Reverse | 6 | |
| Max Speed - Forward | 27.4 mph | 44 km/h |
| Max Speed - Reverse | 21.6 mph | 34.7 km/h |
| Steering | ||
| Articulation L/R | 50 degrees | |
| Turning Radius | 24.3 ft in | 7.4 m |
| Front Axle | ||
| Wheel Lean | 18 degrees | |
| Oscillation - Total | 32 degrees | |
| Ground Clearance | 2 ft in | 594 mm |
| Hydraulic System | ||
| Pump Type | variable piston | |
| Pump Flow | 51.9 gal/min | 196 L/min |
| Relief Valve Pressure | 3500 psi | 24150 kPa |
| Moldboard | ||
| Moldboard Width | 12 ft in | 3658 mm |
| Moldboard Height | 24 in | 610 mm |
| Moldboard Thickness | 0.87 in | 22 mm |
| Max Depth of Cut | 28.9 in | 735 mm |
| Side Shift Left | 20.6 in | 524 mm |
| Side Shift Right | 26 in | 660 mm |
| Blade Pull at Max Weight | 28867 lb | 13094 kg |
| Blade Down Pressure | 23807.7 lb | 10799 kg |
| Circle | ||
| Diameter | 60.2 in | 1530 mm |
| Rotation | 360 degrees | |
| Shift Left | 27.4 in | 695 mm |
| Shift Right | 28.7 in | 728 mm |
| Max Reach Outside Tires - Left | 73.6 in | 1859 mm |
| Max Reach Outside Tires - Right | 71.2 in | 1809 mm |
| Max Lift Above Ground | 18.9 in | 480 mm |
| Blade Tip Angle - Front | 40 degrees | |
| Blade Tip Angle - Rear | 5 degrees | |
| Dimensions | ||
| Height to Top of Cab | 10.2 ft in | 3107 mm |
| Overall Length | 28.1 ft in | 8571 mm |
| Width Over Tires | 8 ft in | 2440 mm |
| Wheelbase | 20 ft in | 6086 mm |
| Blade Base | 8.4 ft in | 2575 mm |
| Tandem Axle Wheelbase | 5 ft in | 1523 mm |
| Rear Ground Clearance | 1.1 ft in | 341.5 mm |
| Front Ground Clearance | 2 ft in | 594 mm |