| Model Number: | YT-W200 |
|---|---|
| Brand Name: | YT |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
Introduction
Overview
Product YT-W200 includes two parts: YT-W200T and YT-W200R, this sets can transmit uncompressed 1080P/60Hz video contents wirelessly, user could operate it easily, connect YT-W200T to your multiple High-Definition devices such as Cable/ Satellite Box, HD Set-Top Box, Blue-Ray DVD Player, Game Console, and Media Center PC hidden in your cabinet behind your seating area, the other side, connect YT-W200R to your HDTV set by HDMI cable, Any display like LCD, PDP or computer monitor with HDMI input interface. It solves the cluttered cables connection problem and let your room clean.
Main features.
-Working frequency range: 4.9GHz~ 5.9 GHz ;
-With DFS function;
-Smart outfit and portable;
-Build in Omni-directional antennas;
-Over 30 meters whole-house ange with no latency;
-Remote control easily.
4. Product Specification
|
|
|||
|
Product Name |
YT-W200T |
YT-W200R |
|
|
Supported Video Resolution |
1080p, 720p, 1080i, 576i, 576p, 480p, 480i |
||
|
HDMI Interface |
Supports HDMI 1.3 Video Audio format and HDCP 2.0 with video encryption. |
||
|
Transmission Distance |
Whole home range and penetrates through 2~3 concrete walls: 30meters. |
||
|
System Latency |
<1 ms |
||
|
Antenna |
Omni-directional internal antennas. |
||
|
Operating Frequencies |
4.9~ 5.9GHz (with DFS function). |
||
|
Power Supply |
100~ 240V AC in, 5V 3A DC out Power Adaptor |
||
|
Regulations |
FCC, CE |
||
|
Certification |
802.11a/n |
||
|
Supporting link speeds |
2.5mm Phone Jack, External IR remote controller |
Build-in Infrared Remote-control Receiver Module |
|
|
IR function |
153(L)*101(W)*24mm(H) |
||
|
Working temperature |
0 °C -70 °C |
||
|
Dimensions |
146(L)*93(W)*25mm(H) |
||
Basic Troubleshooting
Before proceeding to the common troubleshooting procedures below make
sure that Tx,Rx,source and display are powered and connected.
|
No Video |
Check the status of the Link LEDs |
|
LEDs off |
Make sure the power is connected |
|
T x Video LED off |
Make sure the source is on, connected to the HDMI port and out putting a legal resolution. Connecting an invalid video to the HDMI port should turn the Green LED off. |
|
R x Video LED on,but no image on screen |
Make sure the display is connected on and set on the right channel/source(eg. HDMI channel),and make sure the HDMI wire is connected is well. |
|
T x /Rx Link LED off |
Make sure the Tx and Rx are placed in the effective distance. |
|
Bad Picture |
Make sure the HDMI cables used are intact and that you get a good picture by connecting the source directly to the display by an HDMI cable. Make sure nothing is touching or blocking the antennas Try restarting the link. |
|
Bad Audio/No Audio |
Make sure that the source is outputting legal audio formats If there are mutes during the link, try restarting the link Make sure there is no 5.8GHz wireless phone within less than 50 cm form the Rx.Some of the phonees on the market use sub-standard transmission schemes. |
|
Other Issues/ Unresolved Issues |
If any other issue occurs of if the above issues persist,try powering off both Rx and Tx and repeating the link set-up process. |