Introduction

Micro Powder Mill is also called high pressure micro powder mill, which is a highly efficient powder grinding machine manufactured on the basis of high-pressure grinding mill and improving the classification technology of the fineness of the final products. This machine technically solves the difficult problem of the classification of superfine powders, thus greatly improving the classification efficiency while ensuring the grinding quality and output.The finished products granularity of grinding machine has a wide range, the largest diameter of particles can reach to 30 mu, the general diameter of particles is up to 0.033 millimeter(425 mu). The finest small amount of material can reach to 0.013 millimeter(1000 mu).

This machine can be used in the grinding operation of feldspar, marble and limestone and it is capable of grinding the ultrafine powder and the product granularity can reach 3.55 micron~25 micron.It is suitable for high fine powder processing of a variety of materials in mining, metallurgy, chemical industry, building materials or other industries. The finished product size can be adjusted (the smallest is up to 800 mesh). The machine can add special device to produce 30-80 mesh coarse powder.

Advantages and Benefits of Fote Micro Powder Mill

1. Higher Output. Its output increases by 10%-20% comparing with Raymond mill under the same power condition.

2. Larger Range of Final Fineness. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).

3. Good Dust Control. Micro powder mikk meets the requirement of national dust-dump standard.

4. Easy to Operate. The whole system is combined by some independent systems, and the cohesion between the systems is good.

5. Excellent Sealing. The multi-class seals are adopted to keep the grinding equipment tight closed.