Feature:

 

1.One sensitivity (SEN) control knob on the right hand side of the unit to control the sensitivity. Base on
different skin to adjust it .          

2.An intensity (INT) and ON/OFF control knob on the left hand side of the unit to control

3.the intensity of the output through the metal probe electrode, which is located at the front tip of the unit.

4.A push type button on the front top of the unit. Press this button to activate the stimulation mode. A
continuous electric pulse of 1 to 16 Hz (adjustable) is mitted through the metal probe.              

5.Frequency adjustment dial, located under the sensitivity (SEN) control knob, to adjust the frequency of
stimulation from 1Hz to 16Hz.        

6.The digital Display Screen is located on the rear top side of the unit. It features numerical display (0 to
500) to remind user if find the acupoint or not . 

7.the larger number is mean more closer the acupoint.

8.There is a green pilot lamp on top of the unit, next to the push type

9.button(LOC/STIM). This will continue light up when find the acupoint or stimulation mode is in action.

10.Two ground plates, one located at the front left hand side, and the other one underneath the unit, allow
the user to hold the unit and touch the ground plate(s) easily in closing the circuit for point detection of
stimulation.

11.There is one jack on the bottom side of the unit. This is for connecting the electro pad (Ashi Pad).

12.Frequency adjustment dial, to adjust the frequency of stimulation from 1 to 16 Hz. The frequency selected
can be read from the display chamber when pressing down the push type button on the front top of the unit.   

13.Two ground plates, one located at the front left hand side, and the other one underneath the unit, to allow
the user(or left handed user) to hold the unit  

14.touch the ground plate(s) easily in closing the circuit for point detection or stimulation.

Warming:

 

1.Do not use for head

2.if have cardiac conditions and/or pacemakers ,lung device or others medical electronic equipment in the
body do not use this acupunture device at the same time .    

3.do not use it during pregnancy , menstrual periods , abnormal skin ,fever .

4.do not give no expression ability people to use this acupuncture device

5,be sure to keep out of the reach of children

 

Specification:

 

Output intensity:0 to 10 mA

Ouput Intensity Control:ON/OFF,0 to 10

Power Supply:9 volt battery

Micro-current output :0 to 2 microamps

Sensitivity Adjust Control:0 to 10

Frequency Control:1 to 16Hz

Large LCD Digital Display:Frequency/Sensitivity Indicator

Indicator Lamp:Pluse Rate Indicator

Pulse WIDTH:220 microseconds