Specifications: Through CE certificate
Through ISO9001
Through ISO14001
Through 28001

Purpose:

This series solenoid is applied to the control circuits of AC 50Hz/60Hz, which voltage can reach 380V, as a power component of the hydraulic solenoid directional valve .It can be used in NG6,NG10 screw connected solenoid directional valve of YUKEN.  

  

Usual Service Conditons:

It can be installed randomly.

There is no gas or dust in ambient which can corrupt metal or destroy nonconductor.Or,it will affect the lifetime of products.

The solenoid is applicable for the continuous duty system or intermittent periodic duty system.

The reasonable wave range of supply voltage is between 85%-110%(any special requirements is possible).

The protection is IP65 class.

 

Key Parameters:

Code	MFJ18A-26YC
Rated Voltage(V)	110/120  220/240	100  200
Power Frequency(Hz)	50/60	60
Rated Force(N)	26
Rated  Stroke(mm)	3
Total Stroke(mm)	≥6.1
Static Oil Pressure(Mpa)	16
Start VA (VA)	≤188
Holding VA(VA)	≤60
Operating Frequency (T/h)	12000

 

Operating Notice:

The pushpin of the solenoid is used in adjustment or sometimes in emergency,but when the backpressure of the system is higher,please use screwdriver to push it,not strike it.The wallop can destroy the pushpin and surface of the leading hole,or the solenoid will leak oil or can't reposition.

When solenoid is used in double directions,remember the solenoids can't be energized at the same time in order to prevent the solenoids from burning.

There is a protector of over-current between electrical control system and solenoid,in order to prevent the solenoid and the electrical component from burning in improper conditions.

 

Explanation of Sample:

If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.

Characteristic curve for reference only.

The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by KAIDI.