High-performance Tundish Zirconia Metering Nozzle
Description:
The company developed tundish nozzle, sizing nozzle specially used in small billet caster tundish no plug stem gating system,and it is more suitable for small billet cc,tundish nozzle, sizing nozzle adopt the Special high-quality selection of raw materials, reasonable structure,strong erosion resistance, small change of the nozzle diameter and stable speed in the casting process, according to the customers' request, we can supply inlaying,compound and different types of nozzle products. Tundish nozzle, sizing nozzle.
The product is suitable for open pouring steel in tundish. During ten years of production and using, through users' feedback, we research, develop, and upgrade the product. The earliest full-zirconium sizing nozzle is not used widely because of its high cost. Overall composite zirconium sizing nozzle is widely used in the nineties because of its low cost. However, due to the short service life, which is replaced by zirconium mosaic sizing nozzle now promoted.
Sizing nozzle can be divided into two types according to dimensions: one is mosaic sizing nozzle series according to national standard sizes; the other one is heterosexual tundish upper nozzle series based on the drawings offered by the use of factory. After long-term production and actual use, this product has good thermal shock resistance, corrosion resistance, and low expanding rate, without bias, casual flow, burst, and drift tube phenomenon. The product types in high-middle and low range of different levels can meet the needs of different users.
Advantage:
The Tundish Nozzle has the properties of high refractoriness,good resistance to shock,good resistance to erosion,bearing rushing scour , high flow-controlling stability and long life etc.
Application:
They are mainly used in the basic zones of small billet,big billet, rectangular billet.etc.
Packing:
Plywood case;be packed in strong seaworthy wooden cases;as your required.
Our experience:
We are taphole clay, seating block, slide gate plate, tundish nozzle, sizing nozzle, submerged nozzle manufacturer and exporter with over 20 years manufacture experience.
Technical parameter:
|
ITEM |
Al-C Slide Plate |
Al-Zr-C Slide Plate |
||||||
|
70 |
75 |
80 |
85 |
86 |
70 |
75 |
77 |
|
|
Al2O3,% |
70 |
75 |
80 |
85 |
86 |
70 |
75 |
77 |
|
C,% |
7 |
7 |
5 |
5 |
4 |
7 |
7 |
7 |
|
ZrO2,% |
- |
- |
- |
- |
- |
6 |
6 |
2.5 |
|
A.P.,%≤ |
10 |
10 |
10 |
10 |
7 |
10 |
10 |
10 |
|
B.D.,g/cm3 |
2.8 |
2.9 |
2.9 |
3.0 |
2.95 |
3.00 |
3.05 |
2.90 |
|
C.C.S., MPa ≥ |
65 |
70 |
100 |
100 |
100 |
110
|
115 |
100 |