Stable Performance Gypsum Board Machine

Machine introduction: 

Main systems	System introduction
Paper supply system	lThe special pneumatic shaft lMagnetic powder brake lExact paper connection device lHigh definition automatic device l High definition automatic alignment device
Mixing system	lMainly consists of paper slurry,foaming agent,starch,water and additive etc lAll slurry has the feedback signal of level indication and chain control each batching process according to the process requirement
Forming system	lThis part is mainly the forming of wet gypsum board l Can be adjusted manually
Conveying system	lThis part is composed of two sets solidification belt machine and one conveying roller machine. l The three machines need to run synchronically.
Cutting system	l Whole cut control algorithm is achieved by the separate PLC.
Transferring system	l This part mainly function is gypsum board acceleration conveying,overturning,transit conveying and lifting.
Dryer system	l Low heat consumption, heat preservation is good
Finished products converying system	lThis part mainly includes fast outlet,sizing and stacking which are all equipped double.
Fast outlet system	l Can achieve the equipment failure without stopping.
Sizing system	lThis part consists of transverse machine,storage roller,board colse folder and sizing device.
Stacking system	lThis part consists of two sealing machines,stackers.
Control center system	lHost part adopts RS VIEW as the monitoring software table to monitor the whole production process. lThe general monitoring system displays the production process in front of operators and managers.

 

Maybe you have the same questions as follows: 

 

1.Why price is high?                                                                                                                                     

A:Where do you think high?Which product make you feel ours is high?In the current market,there is
no cheap one than us during the same level.If you want to say small workshop,indeed,their machine
is cheaper,but not on the same level.

 

2.How much is your cost?                                                                                                                            

A:Do you have a well known about our product?If not,you can not judge fairly about our machines
whether cheap or expensive.You care about price because you want have profit.Know more about
our product and marketing strategies,or take a visit of our factory,you will know well about price.

 

3.Why your price is cheap?                                                                                                                          

A:That is our selling points and product strategies.First,we buy a large number of material,and
reduce the cost.Second,we have good faith management,no bad assests,the mnagement can
be maximized efficiency.And last,Our management idea is a cost-effective way,low profits,
low price.If you have sincere buying our machine,we can discuss price.

 

4.Do you have quality assurance?                                                                                                               

A:Definitely,we have.If we can not assure the quality,can I sell to you?I seek to a long business
cooperation,not only once.

We have passed ISO9001.

Our service:

(1)Turnkey solution inquiry

(2)One year for free maintainence

(3)One year for free for replacing machine parts

(4)Workshop layout design

 

5.What should do if happens quality problem?                                                                                            

A:No one wants problems.The reason caused by delivery,we will analyse at once,if our problems,
we take responsibility,pls don't worry,we will follow by the contract,solve problems immediately
and provide good service to you. 
 

This is Rubin Industry and hope we can work together for better future!