Model Number: | CS100D |
---|---|
Place of Origin: | China (Mainland) |
Quick Details
Specifications
12V single power supply,RS485 interface(data is sent in single direction).
Advantage:
Mainly used in places and objects with metal interference, such as production line, steel mills, vehicle management, garbage truck etc.
It's similar as RS232 interface which take the initiative to upload the signal, no need the controller, connected to the computer and see the card numbers directly.
The single RS485 is similar with RS232 interface, actively upload signal, without controller. When connect to computer, you can see card ID directly.
RS232: Short signal transmission range, about 30 meters, Medium anti-interference ability.
The single RS485: Up to 2kmtheory transmission range, strong anti-interference, high speed card reading ability, suitable for moving objects.
For example, the vehicle can only use single RS485. Install card reader at bottom of the car, put card in certain place on the road, single RS485 can finish card reading and data uploading even in the40km/hspeed.
In a metal interference environment, you can only use Single RS485.
For example, factory management, large area and long distance.
Because by RS232, the distance between card reader and computer can't exceed 30 meters. But by Single RS485, the reading range can reach 2 kilometers.
Compared with WG and standard RS485, you don't need to use controller, but to control the card reader on computers directly.
1. Introduction
The K100D is a low cost and high performance proximity reader for reading ID code from uem4100 compatible read-only tags. The K100D reader features an extended reading range up to1000mm. It is ideally suited to be applied in automatic parking system, personal
identification, access control and production control systems etc.
2. Features
1. High sensitivity and reliable performance;
2. Built-in transceiver antenna for maximum performance;
3. Maximum effective distance up to1000mm;
4. Less than 100ms decoding time;
5. Low power dissipation with single power supply;
6. Multiple output format optional;
7. Built-in buzzer;
8. Built-in external LED control;
9. Potted for environmental protection.
3. Specifications
Power Requirements |
12Volts linear regulated DC at 200mA typical, 300mA max. |
Interface |
RS485 |
TypicalMaximumReadRange |
Range1000mmwith ISO card in ideal conditions |
Frequency |
125KHz typical |
Transponder |
Read Only |
Audio/visual Indication |
Buzzer output with external LED control |
4. Interface
Color |
Description |
Red |
12VDC |
Black |
GND |
Green |
R+* |
White |
R- |
Brown |
GND |
Yellow |
External LED control(Internal 2K pulled-up to +5V) |
Grey |
GND |
Blue |
GND |