SS400 steel under JIS G3101 standard, the material number is 1.0044. SS400 is one of the most commonly used hot rolled general structural steel. Supplied as plates, sheets, flats, bars, sections etc. They are cheap, excelling in weldability and machinability.
SS400 Round bar diameter : 1mm-2000mm
SS400 Square bar size: 50mm * 50mm-600mm *600mm
SS400 Plate steel/flat bar size: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
SS400 Tube/pipe size: OD: 6-219mm WT: 1-35 mm.
SS400 Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
SS400 Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
SS400 Mechanical Properties Density (kg/m3) 7860 Young's Modulus (GPa) 190-210 Tensile Strength (MPa) 400 – 510 MPa Yield Strength (MPa) 205-245 MPa Poisson's ratio 0.26SS400 Hardness Brinell Hardness (HB) 160SS400 Equivalents.
SS400 Chemical Composition:
As per JIS G 3101, Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.
SS400 equivalent material: EN 10025 S275JR, DIN 17100 St 44-2, NFA 35-501 E 28-2, UNI 7070 Fe 430 B, BS 4360 43 B, UNE 36.080 AE 275 B, ASTM A 283 D, A 36.
We will do our best to serve you the most qualified SS400 steel. If you are interested in SS400 steel, Please don't hesitate to contact us.