| Model Number: | T200 |
|---|---|
| Brand Name: | HLD |
| Place of Origin: | China (Mainland) |
| Design Printing: | No Printing |
| Feature: | Freon-Proof |
| Adhesive Type: | Pressure Sensitive |
| Adhesive: | Rubber |
| Adhesive Side: | Single Sided |
| Use: | Masking |
Quick Details
Specifications
Self adhesive joint wrap tape
Description:
The product that cold applied tape coating system for corrosion protection of Oil,
Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The tape shall be applied after the primer and before the outerlayer tape by hand or
with a wrapping machine.
Feature:
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Structure:
It is consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene.
Usage:
1) Anti-corrosion of water pipe, gas pipe, oil pipe, etc
2) Anti-corrosion of electric wire, voltage and communication cable
3) Anti-corrosion of pipe in chemical factories having severe moisture and corrosion 4) Anti-corrosion of various pipe lines
Application temperature : -34°C ~ 71°C
Service temperature : -34°C ~ 85°C
Sub-material:
Primer:Primer increases tape adhesiveness.
How to use?
1)Pipe surface processing Thoroughly clean the surface of the pipe by removing all foreign material. Completely remove any sharp projections from the area of the weld. Remove all rust and/or other impurities using a steel brush.
2) Apply primer Before application, shake or mix primer thoroughly. Because it is highly volatile, make sure it is securely sealed after use. Because it contains inflammable solvents, use caution when working near any open flames. To obtain best results, apply primer in a temperature range of 0°C~25°C and for storage a
temperature of -20°C~35°C is best. Proper volume of primer is 100g per 1m2. When primer is applied and PE anti-corrosive tape is used, it is recommended to apply the
tape within a short time after the primer is completely dry.
Size:
thickness: 0.3mm-2.0mm
width: 10mm--300mm
length:10m-120m