| Input Voltage: | 220V |
|---|---|
| Output Type: | Single |
| Output Power: | 101 - 200W |
| Model Number: | DR120W |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
| Model | DR-120-12 | DR-120-24 | DR-120-48 | |
|
output |
DC voltage | 12V | 24V | 48V |
| Voltage tolerance | ±2% | ±1% | ±1% | |
| Rated current | 8.3A | 5A | 2.5A | |
| Current range | 0~8.3A | 0~5A | 0~2.5A | |
| Rated power | 96.6W | 120W | 120W | |
| Ripple&noise | 100mvp-p | 120mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | |
|
input |
Voltage range | 90~264VAC,127~373VDC | ||
| frequency | 47~63HZ | |||
| AC current | 2.6A/110VAC,1.6A/220VAC | |||
| efficiency | 82% | 84% | 85% | |
| Inrush current | Cold start current 25A/110VAC,45A/220VAC | |||
| Leakage current | < 1mA/240VAC | |||
|
protection |
Over load | Rated output power105%~150% start over load protection | ||
| protection type:hiccup mode,auto-recovery after fault condition is removed | ||||
| over voltage | 15.6~17.8V | 30.6~33.2V | 54.8~56.6V | |
| protection type:cut off output voltage,diode clamp | ||||
| environment | Working temp,humidity | -20°C~+60°C,20%~90%RH | ||
| Storagetemp,humidity | -40°C~+85°C,10%~95%RH non-condensing | |||
| Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | |||
| safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | |||
| Fitstandard | Safety standard | Fit UL1012 | ||
| EMC standard | comply with EN55022,CLASSA | |||
| others | Dimension | 55.5*125.2*100mm (L*W*H) | ||
| Weight/packing | 0.3kg/45pcs/13.2KG | |||
| note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
|||