Introduction:
Air swept mill is used for coal grinding system for industrial furnace and rotary kiln which required the fineness of pulverized coal being 200 mesh (85%) and the water content being less than 2%. Air swept mill is the best processing equipment for grinding and drying coal powder at the same time.
Specification:
|
Specification (mm) |
Grinding media loading |
Cylinder rev(r/min) |
Capacity (t/h) |
Motor |
||
|
Model |
Power(kw) |
Voltage(v) |
||||
|
Φ1200x2400 |
4.8 |
32 |
1.4-2 |
Y280M-8 |
45 |
380 |
|
Φ1500x3000 |
8 |
28.8 |
2-3 |
JR125-8 |
95 |
380 |
|
Φ1700x2500 |
7.5 |
24.5 |
3-5 |
JR116-6 |
95 |
380 |
|
Φ2200x3000 |
13 |
22 |
5-6 |
JR136-8 |
180 |
380 |
|
Φ2200x4400 |
|
21 |
8-9 |
YRKK4501-6 |
250 |
380 |
|
Φ2200x5800 |
|
21 |
5.5-7 |
Y4005-8 |
280 |
380 |
|
Φ2400x4750 |
22 |
20 |
10-12 |
YR400-8 |
280 |
6000 |
|
Φ2400x4000+2000 |
|
|
10-11 |
YRKK450-8 |
250 |
6000 |
|
Φ2400x4500+2000 |
|
|
10-12 |
YRKK500-8 |
280 |
6000 |
|
Φ2500x3900 |
|
|
14 |
JR138-8 |
280 |
6000 |
|
Φ2600x(5250+2250) |
|
|
9-10 |
YRKK500-8 |
400 |
6000 |
|
Φ2800x(5000+3000) |
|
|
13-13.5 |
Y5001-8 |
500 |
6000 |
|
Φ2900x4700 |
35 |
18.3 |
16 |
JSQ1512-6 |
570 |
6000 |
Working Principle:
Coal feeding equipment by feeding loaded into the ground inside, hot air into duct into the ground from within, as the rotation of the cylinder grinding machine, hot air in grinding coal and coal in grinding heat within, shattered and grinding, in the meanwhile, by grinding coal powder was through the hot air, via within grinding of mill discharging device brought out the grinding machine.
http://
http://
http://
http://
http://
http://