European style single girder bridge cranes with hoist

European style electric single girder overhead cranes

European style electric single girder Eot cranes--

Brief introduction:

It is of advanced technology, whose design is based on international standard: FEM (Europe), DIN (Germany), ISO(International), equipped with many advantages such as: strong rigidity, light dead weight, low power, outstanding structure design etc. 
The configurations are very advanced, such as Schneider electricals, ABM/Nord / SEW triple gear motor (three in one: motor, gear box, brake), galvanized high strength wire rope, self-adjusted disk brake, hard tooth reducer, programmable lifting limit switch, and so on.

Unique features:

a) high reliability, safety, free maintenance rate;

   1) work duty: FEM2M, M5

   2) Protection class: IP55

   3) continuing rate: 60% ( for the high class motor)

   4) Cooling rate: 30% than normal crane

   5) Over temperature protection: 170°C

b) compact design, small size, low dead weight, low headroom

c) Low noise

d) Investment-saved---the workshop's civil work cost, due to crane's light dead weight and low wheel pressure.                                                                                                                                                         e) Power-saved. The total motor power is much lower than normal design.

Technical Parameters for reference:

Lifting capacity	Span	Lifting height	Work duty	Lifting speed	Dead weight
2T	6-21M	6-9M	M5/FEM2M	5/0.8m/min	0.99-3.8T
3.2T	6-21M	6-9M	M5/FEM2M	5/0.8m/min	1.09-4.26t
5T	6-21M	6-9M	M5/FEM2M	5/0.8m/min	1.28-4.91t
10T	6-21M	6-9M	M5/FEM2M	5/0.8m/min	2-6.5t
Note: Cross travelling speed is 20/5m/min; Long travelling speed is 32/8m/min