1.  Electronic box can be concealed behind radio or in glove box
2.  Illuminated 3-key cable remote control for safe operation
3.  Access to mobile phone voice-dial function (voice tags)
4.  Automatic radio mute function when calling
5.  Perfect voice output thanks to use of vehicle sound system


Positing and installation
Step 1:
First of all, choose the most suitable location for the illuminated remote control by positioning it or holding it at different locations in the vehicle yourself. Once you have found a suitable position for the illuminated remote control, you can attach it/mount it appropriately. Please use the cleaning cloth provided to remove any grease or dirt from the surfaces. Please remember that in the event of strong temperature variations, depending on the structure and quality, the colors of the surface may fade during subsequent use.
Important:
The remote control can only be stuck down once. Damage to its adhesive surface may occur when it is removed.

Step 2:
Depending on the vehicle type and its equipment, it is reasonable to install the microphone either at the A-pillar, at the sun shield or at the roof interior. For details about the equipment features please refer to the vehicle documents.

Step 3:
Please lay the cables in a way that they do not lie/hang unsecured in the vehicle and that they many not influence the conducting of the vehicle. When laying a cable, please take care that it is not under traction stress but that it has some tolerance. Avoid crushing the cable as damages of the insulation can be caused by friction/rubbing.

Step 4:
Install the electronics box at a convenient place in the vehicle. This can e. G. Behind the radio, in the glove box, or in the centre console. Please mind that you can access the connections of the box without difficulty.
Important:
Please install the electronics box behind a cover or somewhere you can only reach by opening or unfastening a protective cover/ a cover. The terminal box must not hang loosely in the vehicle.