Pillow block Unit SP in stainless steel

The stainless steel pillow block bearing units type SP is suitable for the food industry and other demanding environments, due to the hygienic design and minimum of maintenance.
The stainless steel bearing units are characterized by high quality and finish for both the bearing and the bearing housing.

Pillow block Unit SP in stainless steel advantages

The bearing unit has adjustable pre-lubricated Aisi440C stainless steel ball bearing.
The bearing can be re-lubricated by stainless steel Aisi304 grease-nipple or a quick coupler.
The bearing unit can be fitted with safety cap of polypropylene or Stainless steel AISI 304.
The bearing unit can be fitted with rotary shaft seal ring (TC) with extra dust-protection lip in NBR rubber and with Stainless steel spring.

Pillow block Unit SP in stainless steel features

- Stainless steel housings AISI 304
- Stainless steel bearings AISI 440C (pre-lubricated)
- Stainless steel grease nipples AISI304 M6x1mm
- No surface coating are required
- Excellent life span
- Operating temperature from -30°C to +120°C.
- Cap material: Polypropylene or Stainless steel AISI 304
- Oil seal material: NBR Rubber with stainless spring

Pillow block Unit SP in stainless steel sizes available

Shaft Diameter   Catalog No.
 20 mm            SP 204
 25 mm            SP 205
 30 mm            SP 206
 35 mm            SP 207
 40 mm            SP 208
 45 mm            SP 209
 50 mm            SP 210
 55 mm            SP 211
 60 mm            SP 212
 65 mm            SP 213
 70 mm            SP 214
 75 mm            SP 215
 80 mm            SP 216
 85 mm            SP 217
 90 mm            SP 218

The SP2xx can be supplied with open cap or closed cap.
Open Cap, suffix "OC" is added to bearing numbers. ex.: SP204OC
Closed Cap, suffix "CC" is added to bearing numbers. ex.: SP204CC
Open Cap Aisi304, suffix "OCSS" is added to bearing numbers. ex.: SP204OCSS
Closed Cap Aisi304, suffix "CCSS" is added to bearing numbers. ex.: SP204CCSS