Hanger Unit SHA in stainless steel.

The stainless steel Hanger bearing units type SHA is suitable for the food industry and other demanding environments, due to the hygienic design and minimum of maintenance.
The stainless steel bearing units are characterized by high quality and finish for both the bearing and the bearing housing.

Hanger Unit SHA in stainless steel advantages.

The bearing unit has adjustable pre-lubricated Aisi440C stainless steel ball bearing.
The bearing can be re-lubricated by stainless steel Aisi304 grease-nipple or a quick coupler.
The bearing unit can be fitted with safety cap of polypropylene or Stainless steel AISI 304.
The bearing unit can be fitted with rotary shaft seal ring (TC) with extra dust-protection lip in NBR rubber and with Stainless steel spring.

Hanger Unit SHA in stainless steel features.

- Stainless steel housings AISI 304
- Stainless steel bearings AISI 440C
- Stainless steel grease nipples AISI 440C M 6x1 mm
- No surface coating are required
- Excellent life span
- Operating temperature from -30°C to +120°C.
- Cover material: Polypropylene or Stainless steel AISI 304
- Oil seal material: NBR Rubber with stainless spring

Hanger Unit SHA in stainless steel sizes available.

Shaft Diameter   Catalog No.
 20 mm           SHA 204
 25 mm           SHA 205
 30 mm           SHA 206
 35 mm           SHA 207
 40 mm           SHA 208
 45 mm           SHA 209
 50 mm           SHA 210
 55 mm           SHA 211
 60 mm           SHA 212

- Hanger Unit with Inch thread also available on request

The SHA2xx can be supplied with open cap or closed cap.
Open Cap, suffix "OC" is added to bearing numbers. ex.: SHA204OC
Closed Cap, suffix "CC" is added to bearing numbers. ex.: SHA204CC
Open Cap Aisi304, suffix "OCSS" is added to bearing numbers. ex.: SHA204OCSS
Closed Cap Aisi304, suffix "CCSS" is added to bearing numbers. ex.: SHA204CCSS