Description:
HS318L adopts gas-liquid push or gas-gas push principle. the extra air compressor give active power to pre-pressure for the whole calibrating system,perfectly instead of the heavy and complete hand work operation. Servo control pressure and dynamic equilibrium design that make the pressure values very exact and stability. Pressurized valve adjust the exact pressure value with the min adjust resolution is 1kPa. .very save labor ,only a finger can pressurize to full scale.5pcs pressure output interface with ss material .that can calibrate four pressure gauges once time. The quick coupling is easy to install pressure instrument without using the wrenches. Each output interface set the sepical shut-off valve. iffernet pressure range pressure instrument will be calibrated. This instrument is easy to operate and very rapidly generate the required testing pressure, providing precise pressure control, only needs less than 5s to stabilize the pressure. Following the points above mentioned, It importantly features in saving both effort and time, which is very suitable to do heavy & repeat calibration.

Feature:
1.First model ,unique design
2.Steady & Servo control pressure
3.Five pieces outputs ,each one with special shut-off design

Specification:
1.Generated pressure range:(0~600)bar,The model HS318L
                           (0~25)bar,The modle HS316L
                           (0~60)bar,The modle HS317L
2.Working medium: 25# transformer oil for HS318L
                  Air for HS316L&HS317L
3.Stability speed:Within 5S each point
4.Material: Steel for main body
            Body : Output part: stainless steel
             Seals : Buna-N
5.Output interface connection: M2.0×1.5(Female) 5pcs
weight: HS318L:26.5kg
               HS317L&HS316L:24kg
7.Dimension: HS318L: 730L×350W×250H (mm)
             HS317L&HS316L: 850L×320W×250H (mm)
8.Package:Plywood case