HJB series pump is a horizontal single stage end suction pump, designed as per the international standard ISO2858. It is commonly used to industrial and urban water supply as well as the agriculture irrigation. It is suitable for pumping liquid which the physical and chemical properties similar to clean water with a temperature not higher 80 ℃.

HJB centrifugal end suction pump 's casing and cover is divided by the reverse side of the impeller, which is commonly called the "back pull out construction" , the benefit is easy to maintain without disassembly pump body and pipe.
To balance the axial force, it has the sealing rings at both front and back of the impeller. The shaft seal is made up of packing gland, packing ring and the packing. The axial structure seal is composed of mechanical pump sleeve, mechanical gland and mechanical seal.

Specifications- End Suction Pump
Head: 5-125m
Flow Rate: 6.3-400m3/h
Rotation Speed: 2900 r/min or 1454r/min
Discharge Diameter: to 250mm
Casing Feet for Easy Back Pullout
Coupling Guard
Heavy Duty Formed Steel Base
Temperature Range: Less than 80 degree centigrade.
Shaft Seal: Mechanical Seal
Drive Mode: Electric Motor or Diesel Engine
Type: Horizontal Centrifugal Single Stage and Single Suction

Features- End Suction Pump
Casing: High quality cast iron
Shaft Seal: Packing seal, mechanical seal or centrifugal/dynamic seal optional.
Impeller: Open or Enclosed Impeller.
Bearing: Reliable, high quality bearing unit with different lubrication options
Multipurpose: Suitable for a variety of demanding industrial applications
Simple Maintenance: Quick and easy Installation, safe operation, easy maintenance and service

Applications- End Suction Pump
Clean water and impurity liquids
Irrigation systems
Clean water and impurity liquids
Water supply
Large solids containing liquids, etc.