Specification
Size	486*311*70mm	Actual Power	222.3W
Input Voltage	AC100~240V	Output Current	630mA
Output Voltage	DC 65~130V	LED Quantity	144pcs
Lifespan	50, 000 Hours	LED Type	3W
Working Environment	-20~40℃, 45%~95%RH	Color	Red(630nm)/Blue(460nm)
Working Frequency	50~60Hz	LUX	2800/1m 1100/1.5m 650/2m
Lumens	8640lm	Lighting Area	79㎡/4m 113㎡/5m
Inner Carton Size	555*383*160mm	G. W. (Inner carton)	7.9kg
Outer Carton Size	570x410x350mm/2pcs	G. W. (Outer carton)	16.3kg
Standard configuration	LED Light x1, Power line x1, Chaining x2
Remarks	The above parameter is based on Red: Blue=8:1, for reference only

Characteristics:

1. Changed mesh vents to hollow out, increase the air displacement and the cooling capacity per unit time, more convenient forcarrying.

2. Using built-inquiet fans, and use the shutter in the wind, induced draftfrom all sides, very low noise, waterproof and dustproof, waterproof grade can reach IP32.

3. Special structure make the heat dissipation effect very good, the temperature of the LEDs' feet dropped below 50°, lowestbad loss rate of the lamp bead.

4. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damaging the lamp body.

Introduction:

1. Use high quality LED lighting source, the lifespan is up to 50000 hours.

2. Replace 3~5 times of the HPSL power, 80% electric energy saving than the tradition HPSL and MHL.

3. High lighting effect, 90% of the light will be absorbed by the aquatic plant, but to the traditional HPSL and MHL, the lighting effect is just 8%~10%.

4. Input cooling system, well solve the heat sink problem.

5. The input voltage is AC100V~240V, suitable for the world standard. Built-in power supply. No need other equipment, just access AC100~240V voltage from the plug, the lamp will be working smoothly, don't need the reflector and ballast either.

6. The lighting area and the height are changeable according to different plants and environments, the same as the parameter.

7. Environment-friendly, no mercury and other harmful heavy metal.

8. Customers can choose the different ratios, Our suggestion is red: blue=8:1 or 7:2, red: blue: orange=7:1:1. The suggested wavelength of the red is 620-630nm, the blue is 460-470nm and the orange is 610-615nm. With the mixture of red , blue, orange, yellow, UV, IR and white lights, provide the plants needed nutrient light. The red LEDs are good for sprouting and flowering, while the blue LEDs promote the growth, at the same time, customers also can choose the more suitable wavelength and LED colors.

Application:

Ideal for all phases of plant growth, and works well with water solution culture and soil culture. Can be used in house garden, pot culture, garden, sowing, breeding, farm, flower exhibition, bonsai, garden, green house, sowing, breeding, farm, greenhouse cultivation, water soluble breeding, greenhouse cultivation, pipeline cultivation and so on.

Attention:

1. In order to save energy, please turn off the power if not use the lamp in a long time.

2. Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture.

3. The working environment for the light is -20~40℃, 45%RH~90%RH.

4. To protect the light, Pls cut off the power when there is a lightning strike.

5. Don't touch or move when the light working.