By chopping the steps of a basic stepper motor, micro-stepping is achieved. So just by controlling current in motor windings, microstepping can be accomplished by generating number of steps between full Step positions. Tstep-484 bipolar drive can run the motors running on 20 V- 48 V rated voltage and 4A rated current.

Features of stepper driver Tstep-484:

• A perfect micro-stepping drive by using sinusoidal current for an accurate motion.
• Tstep-484 can drive motor with which can run on 20 V-48 V rated voltage and 4A rated current.
• Jumper selectable drive current for driving range of stepper motor.
• Optoisolated step and direction inputs and error outputs.
• When the motor is stopped, there is less motor heating with automatic current reductions.
• Drive is very compact and less installation space is required.
• Maximum torque is achieved at high rotational speed by automatic current compensation usage.
• Smooth motion without resonance.
• The drive is versatile and can be used with a range of stepping motors.
• Protection from short circuit.
• You can use drive with 4, 6 and 8 lead steppers in bipolar series, in half coil or parallel configurations.
• Made in India.

Stepper Drive Specification
Series Model			:			Tstep-484
Rated Voltage			:			18 V-48 V
Rated Current			:			Jumper selectable 0.7 A to 4.2 A
Microstepping			:			YES
Idle Current Reduction			:			YES
Short Circuit Protection			:			YES
Isolated Step/Dir Inputs			:			YES