1.rubber lined pipe features:

 

1) Good structure
Pipe reinforced skeleton steel pipe and rubber layer using the high-performance adhesive composite as a whole, to overcome the steel pipe compression wear-resisting, plastic, rubber resistance, high impact pressure and FRP brittle properties such as faults, with steel tube and wear-resisting rubber joint advantages at the same time, comprehensive performance excellence.
2) High strength, high impact resistance
Rubber elastomer of low density, light weight, good vibration absorbing performance and excellent mechanical shock resistance, high strength, good rigidity, does not produce creep, impact resistant, resistant to earthquakes, water hammer resistance is strong, easy to transport, install and maintain.
3) The suitable temperature range is wide
Desulfurization lining plastic pipe can be in to 50 ° C to + 150 ° C within the scope of use for a long time, lining rubber will not with steel frame by temperature change release.
4) Energy saving
Good lubricity, run small resistance loss, save operating cost.
5) Superior anti-aging performance, general service life under normal working pressure temperature reached more than 15 years (theoretical value). Pipe using 6-8 years nearly 90 ° rotation time, longer service life and lining plastic pipe can be used repeatedly rubber lining four times, reduce cost, short production cycle, to ensure the construction period.

 

 

2.rubber lined pipe application scope:

 

1.Mining, transporting and processing abrasive particles of varying sizes, 
2.Transporting and processing corrosive materials with varying chemical properties, 
3.Transporting slurry via pipeline at extreme temperature differences (interior vs. exterior), 
4.Managing equipment wear performance in light of high velocity transportation, 
5.Reducing work injury from the installation and maintenance of equipment, 
6.Maximizing the speed and effectiveness of all mining, transporting and processing functions, 
7.Minimizing the impact and wear/tear on equipment placed in harsh environments, 
8.Minimizing the replacement or servicing of wearable equipment , 
9.Minimizing the use of costly and hard-to-find skilled labour.

 

More about Henan Liwei:

http://

http://

http://