Product introduction
This kind of filter is used in the hydraulic system for fine filtration. The filter can filter metal impurity, rubber or other contamination, and the tank clean. This filter can be installed on the top of the cover directly or installed with pipe. It has indicator and by-pass valve. When the dirt accumulate in the filter element or the temperature of the system is too low, and the oil inlet pressure reaches 0.35Mpa, the indicator will give signals showing that the filter element should be cleaned, changed or rise the temperature. If no service is done and as the pressure reaches to 0.4mpa,the by-pas valve will open. The filter element is made of glass fiber; so it has high filtration accuracy, low initial pressure loss, high dirt-holding capacity and so on. Filter radio β3, 5, 10, 20＞200, filter efficiency n ≥99.5%, and fit the ISO standard.
Model Code
(  ) ? (  ) - (  )×(  ) (  ) – (  )
 1     2    3   4   5    6 
No.1 Tank mounted return filter series
No.2 BH: medium is water-glycol; omit if use hydraulic oil
No.3 Flow rate (L/min)
No.4 Filtration accuracy (μm)
No.5 L: Threaded connection; F: Flange connection
No.6 Y: With CYB-I indicator; C: with CY-II indicator

Application Fields
1. Metallurgy: used in hydraulic system and lubrication device filtering
2. Petrochemical: Used in the production process, the oil field note well water and gas filter
3. Textile: polyester melt in the purification and drawing process even filter.

 Model               Model of element
RF-60×*               XC0060R*BN/HC

Note:* is filtration accuracy. If the medium is water-glycol, flow rate is 160L/min, filtration accuracy is 10μm,with CYB-I indicator, the model of this filter is RF?BH-160×80Y,the model of element is XC0160R010BN/HC.

Please contact us if you have any questions about our products!