MGhz900t Tyred Gantry Crane is used in the high-speed railway, passenger dedicated lines and the two-lane single-box single-chamber and dual-chamber of 20m, 24m and 32m of the intercity rail. It can also be used in the operation of lifting, transferring and loading beams for the girder transport in the precast yard.
1.The three kinds of precast concrete box girder of 20m, 24m and 32m are lifted from the production pedestal on the prefabricated template and transported to the beam storage pedestal;
2.The precast concrete box girder is lifted from the beam storage pedestal and placed in the channel of girder transport to be loaded on the girder transport in accordance with the requirements after the girder transport goes longitudinally into the girder crane;
3.It is able to work across the pier (headroom ≥21M). That is, it can lift the bridge building crane assembled and the precast concrete box girders to the bridge deck and load them on the girder transport as required. Also, it can lift the whole girder transport to the girder transport on the bridge deck. The girder crane is designed to be match with the lifting point of the bridge building crane; or the corresponding integral lifting AIDS should be provided. The MGhz900t Tyred Gantry Crane has the functions of the tyred gantry crane and the cross line gantry crane.

1.The MGhz900t Tyred Gantry Crane employs the door type legs, the width of which meets the requirements of the 7.25-meter-wide girder transport longitudinally driving in and out with the precast box girder of 20m, 24m and 32m.
2.Other methods of loading the box girder is not allowed and the MGhz900t Tyred Gantry Crane can lift the bridge building crane and girder transport assembled as well as the precast concrete box girders to the bridge deck of 7-meter-high pier.
3.The space of the longitudinal hanging point meet the needs of lifting and loading box girder of 20m,24m and 32m.
4.The vertical shift amount of fine-tuning of the lifting beam trolley with full load and the function of horizontal shift is about 500mm.
5.It can ensure that the box girder will not fall with the lifting winch equipped with dual braking system and other lifting parts with reliable design.
6.It can achieve the 90-degree turn at full load and the number of the machine of pivot steering assisting the cylinder is 32.
7.The running gear uses the hydraulic suspension system, both to meet the requirements of the three-point support of the whole machine, but also to achieve a uniform distribution of loads.