HDMI-CAT-HDMI Extender

Model No: YT-TXRX100M

INTRODUCTION

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Our series of HDMI converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.

The YT-TXRX100M Extender use one cat-6 cables up to 100 meters instead of HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission of high definition signal is very difficult because HDMI cable is very expensive. The Extender is designed to supply for long distance transmission of high definition signal.

Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

FEATURES

• Support HDMI 1.3 protocol 
• HDCP 1.2 protocol compliant
• Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission: Single cat-6 cable up to100 meters is connected between TX and RX of the Extender. The HDMI cable length between the source and the TX or the Sink and the RX will be up to 1-5m. The cat cable length and the HDMI cable length add most up to 100m.                            
• Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
• LED indication: when power is supplied or device is working, LED related with will go bright.
• Support up to10metres AWG26 cable length between extender and source & sink device
• No loss of quality
• Installs in minutes
• Need DC5V/2A power supply

The accessories with the device lists as picture:

1, 5V Power Adaptor

2, one pc of ManualPower Adaptor        

Physical Connection Showing Picture:

Figure 1.0 Front Panel Showing Pictur

HDMI IN: Signal Source Input.

HDMI OUT:Receiver to connect the HDTV or other display.

Figure 1.1 the rear and side board showing picture

To use single cat6 to connect the sender and receiver (with RJ 45 port)

DC 5V: 5V DC-DC Power Adaptor Interface.

Operating and Connecting:

1. Connect one HDMI 1.3 cable up to 10meters between source device and TX Extender
2. Connect one HDMI 1.3 cable up to 10meters between sink device and RX Extender
3. Connect one cat-6 cables up to 100 meters  between TX and RX Extender
4. Connect 5V power supply to the YT-TXRX100M-CAT6Extender

SPECIFICATIONS:                        YT-TXRX100M-CAT6

Length of CAT-6 cable between Rx and TX…..….. ..……. ..… .….…   Up to 100 meters

HDMI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support audio format input..………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

HDMI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support audio format output...……. DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Max bandwidth…………………………………………………165MHz

Max baud rate……………….…….……………4.95Gbps

Input Videosignal ………….……………………….… 0.5~1.5Volts p-p

Output DDC signal ……………………………… 5Volts p-p (TT1L)

Input/Output HDMI1.3 cable distance…….…...≤15m AWG26 HDMI 1.3 standard cable

Max working current……………………………………...800mA

Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A

Operating Temperature range……..……………………… (-15 to +55℃)

Operating Humidity range……….5 to 90%RH (No Condensation)

Dimension (L x W x H)     ……………99*73*27(mm) (RX/TX)

Weight…..……………………..…………………0.43kg/pcs *2

Notes:

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5. Pls turn the power off when the device is not used for long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls use the original factory power adapter.

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:

Serial NO	Trouble Description	Cause and Ways to deal with
1	Non-Power-Connencted	1, Check if the power adaptor head is truly and correctly inserted the power socket. 2, Check the power switch if it is in on status.
2	No Picture	1, Pls to make sure that the TV is on and has been connected with the machine,. 2, To check if the signal source is on and well connected. 3, Check the system connection quality. 4, Check if the line is all good quality. 5, Check the cable quality( to see if the cable is compliant with the HDMI V 1.3..
3	Obscure Picture	1, To try again to connect the cable to be free from the unsuccessful connection. 2, HDMI Cable Quality(HDMI Cable is compliant with the HDMI V1.3)