PFK-800 paper core tube making machine
1.Core tube diameter:Φ25mm-Φ250mm,our standard is Φ76.2mm
2.Tube thickness: 0.5mm-10mm
3.Tube cutting length: max4000mm, the cutting length is controlled by photoelectric
switch,cutting blade tracking cutting.
4.Motor power: invert motor 5.5KW ; cutting motor 0.75KW
5.Control system: frequency adjust speed, multi-point synchronization control
6.Transmission: spiral bevel gear
7.Wheel gear size:Φ270mm
8.Cutting:automatic tracking blade
9.Belt method:being on the belt or counter on the belt. With 1*100mm belt
10.Gluing method: slotted gluing,the gluing pump automatically cycle gluing, glue on
both sides.
11.With automatic flip storage rack
12.Paper feed holder: high strength steel, welded in whole, disk tape paper steering,
each tape tension adjustment, to ensure uniform of the tension.(top configuration can
chose automatic connector)
A.separate paper feed holder for bottom and facial paper, single face gluing.
B.Unilateral papering( 17 layers),with 1 set glue tank
13.Total weight:3000kg
14.Overall size: 3200x2000x1800mm

PFK- 1600 Paper Roll Slitting and Rewinding Machine
1, Main power 4KW; Auxiliary power 1.5 kw
2, Configuration blade tool ; 20 sets
3, Upper and lower raw material ; hydraulic feed
4, Material on the largest diameter ; 1300mm
5, Rewinding largest diameter ; 1200mm
6, Correction ; hydraulic correction
7, Tension control ; magnetic brake control
8, Equipment Maximum effective width ; 1600mm
9, Rewinding shaft ;air shaft