1092 High speed small tissue paper making machine

1. Main technical standard
1.1 Product variety: original tissue paper, napkin original paper
1.2 Grammage: 13-30g/ m2
1.3 Material: Wide (needle) leaf pulp, selected regenerative pulp
1.4 Paper making machine type:PFK-1092
1.5 Width of net paper: 1260 mm
1.6 Gauge:1900m
1.7 Designed speed: 250m/min
1.8 Work speed: 160-200m/min
1.9 Theoretical yield: 2.5～3.0 ton/day
1.10 Drive:AC variable speed , universal joint branch transmission
1.11 Main machine power: 30KW; Reeling power: 1.5KW
2. Technical parameters:
2.1 Slurry pulp kinds:
recycling waste paper pulp, bamboo pulp, grasses pulp
2.2 Dryness of the tissue at different part
On net slurry concentration: > 0.15%
After dryness couch roll : > 5%
Feed roller before dryness : > 30%
Into the dryer dryness : > 40%
Wrinkling dryness : 88%
Finished tissue paper dryness : 92-95 %
2.3 Line pressure:
Couch : Design 2N / mm working 2N / mm
Roller press : Design 95 N / mm working 65 N / mm
2.4Air supply system pressure : 0.8Mpa
2.5 Various parts of the desired air pressure :
Roller pneumatic tires : 0.2-0.4Mpa
Scraper pneumatic tires : 0.1-0.15 Mpa
Blade cylinder : 0.2-0.25 Mpa
Couch roll drums : 0.2 Mpa
Blanket correction device : 0.2 Mpa
3. Consumption parameter:
3.1 Pulp consume volume (kg / ton of tissue paper ): 1080kg / ton
3.2 water (m 3 / ton of paper ) :
Pure water: ≦ 35m 3 ( desired pressure : 0.2 ~ 0.4Mpa)
High pressure water : ≦ 20m 3 ( desired pressure : 0.6 ~ 2.0 Mpa)
3.3 power consumption (KWH / ton of tissue paper ): ≦ 270KWH
3.4 Single machine air amount (m 3 / min): 0.15 ~ 0.2
3.5 steam consumption ( tons / ton of paper ): ≦ 4.5T
3.6 Displacement of water ( cu m / ton of paper ): ≦ 55m 3
4. Water , electricity, steam , compressed air requirements
4.1 water, clarified water
Requirements: pure, colorless , desanding
Pressure : 2MPa, 0.7MPa, 0.4MPa three kinds (including high pressure
water must be filtered through a filter)
PH value : PH ± 1
Solid content : <60g / 1000L
4.2 Power Parameters
Motor voltage : 380VAC / 50Hz three phase
220VAC / 50Hz single-phase
Control voltage : 220VAC / 50Hz single-phase 24VDC
4.3 Steam pressure
Dryer maximum working pressure : 0.4Mpa
4.4 CompressedAir
Requirements: filtration , oil, in addition to water , dried
Air pressure : 0.7 ~ 0.8MPa
Page 3 of 12
Pressure : ≤0.6MPa
Supply air temperature : 5 ~ 35 ℃
Quality rating: gas cylinders and valves not less than GB / T13277-91 3
grade