| Model Number: | PU8611 |
|---|---|
| Brand Name: | SEPUNA |
| Usage: | Construction,Fiber & Garment,Footwear & Leather,Packing,Transportation,Woodworking |
| Main Raw Material: | Polyurethane |
| Classification: | Other Adhesives |
| Place of Origin: | China (Mainland) |
| EINECS No.: | 210-898-8 |
| MF: | C9H6N202 |
| Other Names: | PU Adhesive Sealant |
| CAS No.: | 65322-69-4 |
Quick Details
Specifications
Features
1. Bond very well with surface of variety substrates such as all kinds of metal, lumber, glass, polyurethane, epoxy, resign,
PU and coating material, etc. Also with good cohesive force and durable elastic sealing performance
2. One component sealant with fabulous thixotropy, it's convenient to apply with rapid curing
3. Excellent water, weather and aging resistance
4. Excellent wear-resisting property, high tear strength
5. Paintable and polishable
6. No sag or flow phenomena within 30mm perpends
7.Primerless.
Usage
1. Specially used for windshield and side glass of passenger car, cars and special vehicle
2. Also use for glass steel and plastic accessories (car roof, side body and car front)
3. For bonding different material which requires high tensile strength and elasticity, the bonding can bear high mechanical
Model Number
PU 8611
Main Raw Material
Polyurethane
Color
Black
Density
1.35±0.05Gr/cc
Extrudability
≥60ml/min
touch dry time
10-30Min
Curing speed
3-5Mm/24hrs
Shore A-hardness
65±5ShoreA
Tensile strength
≥6N/mm2
Tensile-shear strength
≥3N/mm2
Application temperature
5~35℃
service temperature
-40~80℃
deformation force
◆Operation
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt,
old sealants and any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
2.
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of
water and soap. In case of accident or if you feel unwell, seek medical advice immediately
◆Product Warranty
All product properties and application details based on information believe to be reliable and accurate.
But you still need to test its property and safety before application. The advices we supply don't apply
in any circumstances. Sepuna don't make assurance of any other applications outside the specification until
Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is
defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.