Anping RunTan Metal Wire Mesh Co., Ltd. chemical equipment special teflon mesh PTFE filter mesh

PTFE (Teflon) products are applied to increase the hydrophobic performance of the filter mesh, by means of permitting fuels to pass through but inhibit the passage of water in coalescer based systems. In such systems the PTFE filter mesh can be easily cleaned during maintenance and service operations. It can help to reduce operating costs and improve product quality.

Wire dia.: 0.1mm-0.55mm

Mesh: 10-200

Width: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 600mm

Material: 100% pure PTFE filament
Temperature: -20~250°C (-4~+482°F), allow quenching heat, or alternating operation

Pressure: 0.1~6.4Mpa(full vacuum to 64kgf/cm2)(full negative pressure to 64 KGF/cm2)

Weaving method:use 500 dtex filament fiber woven (monofil), for the plain weave fabric

General specification:

 

Type	specification
Standard	40-100 60-150 105-300 140-400 160-400 200-570
High efficiency	60-100 80-100 80-150 90-150
	150-300 200-400 300-600
Strong penetration	20-100 30-150 70-400 100-600 170-560
Damping	33-30 38-40 20-40 26-40 30-40
	30-50 48-50 30-60 30-80-50-120

 

                                                                       any specification is accepted

 

Feature:

1. High temperature resistant, use the working temperature of 250 °C.

2. Good low temperature resistance, good mechanical toughness; Even if the temperature dropped to - 196 °C, also can maintain the elongation of 5%.

3. Corrosion - to most chemicals and solvents, inert, acid alkali, water and a variety of organic solvents.

Weather - to be the best in the plastic in aging life.

4. High lubrication - is the lowest in the friction coefficient in solid materials.

5. Don't stick - is the smallest, the surface tension of the solid material don't adhere to any material.

6. High humidity environment also apply;

7. Not easy to aging;

8. No pollution;

PTFE base fabric can be according to the requirements of the filter material strength, design different warp/weft density. Base fabric are more than 1000 n, warp/weft to strong water pressure can reach 50 kg