Stainless Steel Insert Furniture Hinge En15538 Standard & SGS certification
MODEL NO.: DWS261C

PRODUCTION STANDARDS: ACCORDING TO EN15570 & EN15538
SGS CERTIFICATION- 50, 000 TIMES TESTING
48 HOURS SALTY SPAYER TESTING

SPECIFICATION:
Material: 201 Stainless Steel
Finishing: Electrolyze/Water polishing
Type: Insert, C=15
Height: H=2
Degree of Opening: 108°
Degree of Opening: 86° -87.5°
Closing Action: Two way
Hole Distance of cup: 45mm/ 48mm
Hole Distance of plate: 32mm
Edge spacing: 37mm
Cup Depth: 9.5mm/ 11.3mm
Cup Diameter: 35mm
Tab(K): 3-7mm (common is 5mm)
Door thickness: 14-28mm

Heat treatment: 4*7mm screw, U nail, Square spring, connected part.