Product Main

Quick Details

Item Type: Light Strips
Light Source: LED
Model Number: SW-WS2811-48-12
Brand Name: Shengwei
Place of Origin: China (Mainland)
Emitting Color: Changeable
Certification: C-tick,CCC,CE,EMC,Energy Star,ETL,FCC,GS,LVD,PSE,RoHS,SAA,UL
Lamp Body Material: Copper
Working Lifetime(Hour): 50000
Working Temperature(℃):
Color Temperature(CCT): 1800-20000K
CRI (Ra>): 85
Lamp Luminous Flux(lm): 20-24Lm
Lamp Power: 18W/m
Input Voltage(V): 12VDC
Type: Flex LED Strips
LED Light Source: Digital 5050RGB
FPC Color: White
FPC Width: 10mm
Antistatic Packing: 5M/roll/bag
Working Voltage: 12VDC
Connection Method: SM3Pin
Pixel Distance: 20.83mm
Signal Controlling Method: SPI
Grey Scale: 256

Specifications

WS2811 12V 48pix/meter LED digital Strip
Specification
● Working Voltage: 12VDC 
● Led QTY: 48leds/M
● Led Type: RGB5050
● IC Type: WS2811
● Dimension: 5000mm*14.0mm*4mm (waterproof)
                     5000mm*12.0mm*2.5mm(non-waterproof)
● Pixel QTY: 48pixels/m ,each led addressable
● PCB Color: White or Black color 
● Power Consumption: Max 18W/M 
● Brightness Level: 256 level
● Emitting Color: RGB/W/R/G/B/other single color
● Protection class: non-waterproof

WS2811 Family: 5VDC 32pix/m, 5VDC 60pix/m, 12VDC 30pix/m, 12VDC 48pix/m.

Application
  • Hotel/club/KTV polygon of the place such as wall, water droplets ltd. of flowers, a decorative foil atmosphere;
  • Building, advertising, signs, festivals, and other areas of the decorative wall to city beauty/lighting effect;
  • Home decoration lighting, stair, door frames, bar, wine cabinet, wardrobe, TV ark, DIY home decoration...). ;
  • Car beauty, car body, car...) ;
  • Building a castle in the landmark buildings, Bridges, parks the outline of the outline, the ornament lighting effect.
  • Lighting signal (such as all kinds of luminous indicator)
  • Edge - Lighting transparent or the spread of the material
  • Support in the underwater lighting engineering
    Canopy, and the edge of the bridge arch/park/theatre/aircraft cockpit lighting

    Strip Instruction

  • Please read the instructions carefully before installation, and keep it for future reference.
  • Please wear an antistatic wrist strap before strips touched by fingers.
  • Try your best do not touch the surface of LEDs.
  • Don't light strips up when they are in package.
  • Be sure the device is completely connected into the earth before connecting power suppliers with strips.
  • Please pay attention to fire prevention, electricity and vibration.
  • Please replace any cracked waterproof protective cover.
  • orrosive or solubility chemicals will cause damage of the protective shell of lights
  • Lifespan will be opposited affected if beyond working temperature -25oC~60oC.
  • Do not use rough objects or cleaner to wipe down products.
  • Do not use sharp objects to scratch products.
  • Do not use high-pressure water to wash products as it will damage the waterproof parts of strip housing.
  • Do not bend from side, extrusion, screw it, because there will damage internal components.
  • Do not pull or break it with excessive force to cause damage.
  • Please recycling the product seriously after it reach its using lifespan. You also can get some advice from the local retailer.
  • Please don't use strips if it damages, and check regularly to see if there is a problem about wire insulation.
  • The product need professional person to install and maintain it.

Attention
  • Indoor installation: LED lights for indoor installation is simple, because do not have to withstand the wind and rain. Installation can go directly to tear light bar on the back of 3 m double-sided adhesive on the surface of the sticker, then a fixed in the place where you need to install the lamp according to the flat. If there are any corner or article lamp is too long too short, LED lights can be brought in each group with scissors logo tangent place any cutting or welding used alone.
  • Outdoor installation: outdoor installation due to withstand the wind rain, can't use 3 m glue fixed, therefore often adopt the way of card slot fixed outdoor installation, need to cut and connection, methods as well as indoor installation, just need additionally equipped with waterproof glue, in order to consolidate the join waterproof effect.
  • Power supply connection methods: general voltage for the dc DC5V LED magic lantern belt, so you need to use the switch power supply, power supply according to the size of the LED lights with the power and the connection of length.
  • Controller connection mode: the LED with entertaining diversions and RGB lights need to use the controller to achieve change effect, and each of the controller control distance, in general, a simple controller control distance for 10 to 15 meters, remote controller to control a distance of 15 to 20 meters, the longest can control to 30 meters distance. If the LED with the connection of the distance is longer, the controller can't control so long lamp tape, you will need to use power amplifier for tapping.