| Type: | Inkjet Printer |
|---|---|
| After-sales Service Provided: | Overseas service center available |
| Color & Page: | Multicolor |
| Automatic Grade: | Automatic |
| Place of Origin: | Japan |
| Condition: | New |
Quick Details
Specifications
| Model | EGX-360 |
| Workpiece-table size | Width x depth: 305 x 230 mm (12 x 9.1 in.) |
| Cuttable materials: Flat engraving and cylindrical engraving | Acrylics, aluminum, brass, stainless steel (diamond engraving only) and glass *1 |
| Cuttable materials: Ring engraving (inner or outer surface) *2 | Gold, brass and silver, etc. |
| Loadable workpiece weight (when using the motorized vise jaw) | 4.3 kg (including the weight of jig) |
| X, Y, and Z operation strokes | X, Y, and Z: 305 x 230 x 40 mm (12 x 9.1 x 1.6 in.) |
| Maximum angle of rotation | ±18x105° (±5000 rotations) During engraving: ±360° |
| X-, Y-, Z-, and A-axis drive system | Stepping motor |
| Operating speed |
X and Y axis: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec) Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec) A axis: 9rpm |
| Software resolution | 0.01 mm/step or 0.025 mm/step (0.0004in./step or 0.001in./step) |
| Mechanical resolution |
X and Y axis: 0.0025 mm/step (0.0001 in./step) |
| Spindle motor | Brushless DC motor, maximum 50 W |
| Spindle speed | 5,000 to 20,000 rpm |
| Tool chuck | Cutter holder, collet method |
| Loadable workpiece thickness (when using the flat table) |
Maximum 80 mm (3.1 in.) (78 mm (3.0 in.) when nose unit is used) |
| Interface | USB (compliant with Universal Serial Bus Specification Revision 1.1); Serial (RS-232C-compliant) |
| Internal memory | 4 MB |
| Control command set | RML-1 |
| Required power-supply | Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC 60664-1); Required power capacity: 1.9 A (100 to 120 V)/0.8 A (220 to 240 V) |
| Power Consumption | 80 W |
| Operating noise | During operation: 60 dB(A) or less (when not cutting), during standby: 40 dB(A) or less (as specified by ISO 7779) |
| External dimensions | Width x depth x height: 755 x 639 x 675mm (29.8 x 25.2 x 26.6in.) |
| Weight | 84 kg (186 lb) |
| Installation Environment | Operating environment: Temperature of 5 to 40°C (41 to 104°F), 35 to 80% relative humidity (no condensation) Ambient pollution degree: 3 (as specified by IEC 60664-1) |
| Included items | Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), diamond scraper (diameter 4.36 mm), flat table, spare mounting screw (for the cutter holder), wrench, solid collet for diamond scraper (diameter 4.36 mm), solid collet (diameter 4.36 mm), solid collet (diameter 3.175 mm), Cylindrical-engraving adapter, cup cones, face plates, Standard jigs, Pen jigs, water nose attachment, faceplate mounting screws, standard-jig retaining screw, pin jigs, flat-table securing screw, hexagonal screwdriver, hexagonal wrench, handy panel, adhesive sheet, lubricant filter, vacuum adapter for chip cleaning, Dust tray, USB cable, Roland Software Package CD-ROM, Roland EngraveStudio CD-ROM, Roland EngraveStudio Software Guide, and EGX-360 Startup and Maintenance Guide |