| After-sales Service Provided: | Engineers available to service machinery overseas |
|---|---|
| Warranty: | 1 years |
| Voltage: | 380V 3ph |
| Brand Name: | Frozen Shot |
| Condition: | New |
| Model Number: | PG-120T |
| Place of Origin: | China (Mainland) |
| Power: | 10KW |
| Color: | silverwith red strip |
| Program: | PLC |
Quick Details
Specifications
PROCESSING PRINCIPLE
with the decrease of the temperature, rubber/plastic parts enters into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. the flashes can be easily removed and the product not be damaged.
FUNCTION
Our machine is widely used in removing the flashed of small rubber and plastic parts like O rings, gaskets and other molded parts.
with the cryogenic processing technology, the flashes are firstly froze and then shot down the high speed projection media(Ploy carbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly.
MAIN BENIFITS
1.Low Cost, the machine can replace the processing ability of 40-60 hand worker, can reduce the number of workers and reduce the deburring cost to the lowest point.
2.High Efficiency, generally, the smaller type can process 5kgs of rubber parts/batch and only take 5-7mins. If the G.W of single part is 1g, 42500pcs can be processed in one hour.
3.High Processing Precision, if the mold is very good and the flash thickness is below 0.2mm, the processing result will be satisfied. the surface performance is great and feel smooth.
APPLICATIONS
A.O rings, irregular rubber parts with different material and sizes.
B.Micro electronic product parts
C.Precision elastomeric parts
D.Precision injection moulding plastic parts
E.R & D part runs
F.Die casting products, like zinc aluminum, magnesium alloy
Specification
PG-150T
Size:1300mm*1350mm*2250mm
Weight:1500kg
Power supply: AC380V 50HZ 3Ph
Electrical capacity: 8kw
Temperature: -130C--50C
Pressure:0.5-0.7Mpa
Barrel capacity: 120L
Effective capacity: 50L
Wheel speed: 3000rpm-6000rpm
Cooling media: liquid nitrogen
Material: SUS304
with the decrease of the temperature, rubber/plastic parts enters into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. the flashes can be easily removed and the product not be damaged.
FUNCTION
Our machine is widely used in removing the flashed of small rubber and plastic parts like O rings, gaskets and other molded parts.
with the cryogenic processing technology, the flashes are firstly froze and then shot down the high speed projection media(Ploy carbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly.
MAIN BENIFITS
1.Low Cost, the machine can replace the processing ability of 40-60 hand worker, can reduce the number of workers and reduce the deburring cost to the lowest point.
2.High Efficiency, generally, the smaller type can process 5kgs of rubber parts/batch and only take 5-7mins. If the G.W of single part is 1g, 42500pcs can be processed in one hour.
3.High Processing Precision, if the mold is very good and the flash thickness is below 0.2mm, the processing result will be satisfied. the surface performance is great and feel smooth.
APPLICATIONS
A.O rings, irregular rubber parts with different material and sizes.
B.Micro electronic product parts
C.Precision elastomeric parts
D.Precision injection moulding plastic parts
E.R & D part runs
F.Die casting products, like zinc aluminum, magnesium alloy
Specification
PG-150T
Size:1300mm*1350mm*2250mm
Weight:1500kg
Power supply: AC380V 50HZ 3Ph
Electrical capacity: 8kw
Temperature: -130C--50C
Pressure:0.5-0.7Mpa
Barrel capacity: 120L
Effective capacity: 50L
Wheel speed: 3000rpm-6000rpm
Cooling media: liquid nitrogen
Material: SUS304