Highlight:

T-slot table is added above the rotary axes. So when you need to engrave the cylinders, just unscrew and remove the T-slot table. When you need to engrave the plane board or some other rare shaped work piece, just put the rotary axes to the end side and install the T-slot table. Combined two functions together, this machine is quite worthwhile.

 

Ideal for:

1. Timber/wood/foam/bamboo cylinders, etc.

2. Plane board and rare shaped work piece with material like timber, MDF, plastics, soft metal, acrylic and so on.

Processing effect:

Engraving, cutting, drilling, milling, enchase, relief, etc.

SPECIFICATION	CC-K1530-4
Working Diameter	300mm
Working Length	1500mm
Clearance (Z axis)	300mm for rotary axis 200mm for T-slot table
Machine Dimension	1800*1450*1450mm
Spindle	3.5kw air cooled
Spindle Speed	Adjustable 0-24,000 rpm
Tool Change	Manual Tool-Change
Drive System (X & Y Axes)	Helical Rack & Pinion
Linear Guide	Taiwan Hiwin
Drive System (Z Axis)	Germany ball Screw
Drive Motors	Stepper motors
Inverter	Delta
Driver	Yako
Command	G code
Cutter diameter	φ3.175-φ12.7mm
Maximum Idling Speed	35m/min
Resolution	0.01mm
Fixing	By clamp
Cooling Mode	Air cooled
Controller	NC Studio
Power Requirements	3-phase 380V/50HZ

Custom sizes and upgrades for the components are available on request.

Optional parts:

1.        More or less rotary axis

2.        Automatic oil-injection system

3.        Different power requirements

4.        Water-cooled system, etc.

Service & guarantee:

1. Technical supports and suggestions before you order a machine according to your work piece.

2. Professional instruction for the operation of the machine

3. One year warranty, we will provide the consumable parts at cost price after the warranty period. (We suggest you order a few extra consumable parts together with the machine)

4. Our technician will come to your workshop if the problems can not be fixed through Internet or phone communications.

5. 24-hour technical support by email or calling.