Features:
◆ Integrated design with external heat sink
◆ Mechanical relay on non-switched leg
◆ 2 zones per card at 16amps each
◆ Run with grounded or ungrounded thermocouples
◆ Thermocouple slaving (auto and manual)
◆ Phase angel or zero cross power output control
◆ Cards interchangeability
◆ Automated mold diagnostics
◆ Real-time amperage measurement
◆ Patented ll-in-one?control card designed for reliability
◆ Low voltage soft start to maximize heater life

Specification:
1) Power Supply:1-Ph+E(3 wire)200-240Vac
             3-Ph+E(4 wire)200-240Vac
             3-Ph+N+E(5 wire)380-415Vac
2) Frequency:50-60Hz automatic switching
3) Control Mode:Auto-PID / Manual
4) Power Control:Zero Cross / Phase Angle
5) Thermocouple:J or K-Type, software selectable
6) Calibration Accuracy:plus-minus 0.25% FS
7) Measurement Range: 0~500℃(32~900℉)
8) Control Stability:plus-minus 1digit-under steady state
9) Setting Range:0~450℃(32~842℉)
10) Overload Protection:Fuses on both heater legs
11) Load Capacity:Rated 240Vac, 16Amps per zone
12) Working Temperature:0~50℃(0~122℉)
13) Storage Temperature:-20~70℃(-4~158℉)
14) Working Humidity:10~80%RH(No condensing