1.Features

    2 to 120 zones of control

    Large, intuitive, full color touch screen, simple operation

    Interchangeable card design, reduces maintenance costs

    Two zones per card at 16amps per zone

    Real-time amperage measurement

    Integrated design with external heat sink, reduces downtime

    Patented " all-in-one" control card designed for reliability

    Automated mold diagnostics to ensure hardware performance

    Selectable phase angel or zero cross power control method

    Low voltage soft start to maximize heater life

    Multiple startup sequence options available for process optimization

    Quality construction cabinet card rack and connectors

    Mold and controller protection design features reduce downtime

    Minimum cabinet wiring reduces risk of faults

    Multi-mold set-up storage

    USB support for importing and exporting data

    Password enabled security

 

2.Specification 

User Interface	Full color LCD touch screen	Display Size	7.0" or 10.2"  inches
Power Supply	1-Ph+E(3 wire)200-240Vac	Frequency	50-60Hz automatic switching
	3-Ph+E(4 wire)200-240Vac	Control Mode	Auto-PID / Manual
	3-Ph+N+E(5 wire)380-415Vac	Power Control	Zero Cross / Phase Angle
Thermocouple	J or K-Type, software selectable	Degree Unit	℉ or ℃, software selectable
Calibration Accuracy	±0.25% FS	Measurement Range	0~500℃(0~900℉)
Control Stability	±1digit-under steady state	Setting Range	0~450℃(0~842℉)
Overload Protection	Fuses on both heater legs	Load Capacity	Rated  240Vac, 16Amps per zone
Working Temperature	0~50℃(0~122℉)	Soft-Start	Using low voltage for heater safety
Storage Temperature	-20~70℃(-4~158℉)	TC Connector	Varies options available
Working Humidity	10~80%RH(No condensing)	Mold Power Connector	Varies options available