multi-functional copper busbar processing machine

Features:

1.This series CNC busbar processing machinehas three units:punching unit, shearing unitand bending unit.It is easytoadjust each unitto shorten the processing time and improve the production efficiency.

2.The bending unit usesan importedPLC control system,which havestable system and high accuracy. Itis used toprocess copper and aluminum busbars indifferent specification.

3.By relative unitIt caneasily and quickly do all kinds of processing tocopper and aluminum busbar,such as shearing, punching (circular hole and oblong hole), flat/horizontalbending, verticalbending and knurling.Change differentmolds/dies to do flat press,embossing to a copper bar,cable connector press,and can do cutting,flat crushing,pushing,and bending to a copper/aluminium bar/clad.

Main characteristics:
1.The shearing unit uses punch shearing, incision interface is flat,no droop and burrs and waste,beautiful shape.
2.The punching unit uses an united six-mode turnplate in tooth shape to make sure the upper mold and the lower mold are absolutely in the same center,improving the mold concentricity and longtening the working life. The turnplate is in tooth shape with good view and high strength. No need to frequently change molds, labor intensity is highly reduced. It is easy and quick to use.Producing efficiency is obviously higher than a traditional one.
3.The bending unit uses a single-decker working table,which can make sure that three working positions can do their operations at same time without bothering the other.By Changing different mold It can doflat/horizontal bending, and vertical bending.CNC controls the bending angle by an imported PLC control system.Input a busbar thickness and an angle on a CNC touching screen,or a height and a side length to get the result what you need,such as Z bending.Bending accuracy is ±1,repeat accuracy ±0.3. The user can input a data in advance, and the system will follow and do it. The field data can be put into the system at any time and be paged out for using repeatedly.
4.The machine has four moveable trundles and can be easily moved everywhere.There are two operating buttons, manual and foot press,easy to operate..Based on users's requirement,it can do all kinds of special shape processing with different molds or dies.

Technical parameter: