|
LREC3210PF
based Realtek RTL8153-CG 1000M Ethernet controller combines an IEEE
802.3u compliant Media Access Controller (MAC), USB 3.0 bus
controller, and embedded memory. With state-of-the-art DSP technology and
mixed-mode signal technology, the LREC3210PF offers high-speed transmission
over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. Functions
such as Crossover Detection and Auto-Correction, polarity correction,
adaptive equalization, cross-talk cancellation, echo cancellation, timing
recovery, and error correction are implemented to provide robust
transmission and reception capabilities.
The
LREC3210PF features USB 3.0 to provide higher bandwidth and improved
protocols for data exchange between the host and the device. USB 3.0
also offers more advanced power management features for energy saving.
The
LREC3210PF Advanced Configuration Power management Interface (ACPI)—power
management for modern operating systems that are capable of Operating
System-directed Power Management (OSPM)—is supported to achieve the most
efficient power management possible. In addition to the ACPI feature,
remote wake-up (including AMD Magic Packet and Microsoft Wake-Up Frame) is
supported in both ACPI and APM (Advanced Power Management) environments.
The
LREC3210PF supports Microsoft Wake Packet Detection (WPD) to provide
Wake-Up Frame information to the OS, e.g., PatternID, OriginalPacketSize,
SavedPacketSize, SavedPacketOffset, etc. WPD helps prevent
unwanted/unauthorized wake-up of a sleeping computer.
The LREC3210PF
supports Protocol offload. It offloads some of the most common protocols to
NIC hardware in order to prevent spurious wake-up and further reduce power
consumption. The LREC3210PF can offload ARP (IPv4) and NS (IPv6) protocols
while in the D3 power saving state.
The
LREC3210PF supports the ECMA (European Computer Manufacturers Association)
proxy for sleeping hosts standard.
The
LREC3210PF supports IEEE 802.3az-2010, also known as Energy Efficient
Ethernet (EEE). IEEE 802.3az-2010 operates with the IEEE 802.3 Media Access
Control (MAC) Sublayer to support operation in Low Power Idle mode. When
the Ethernet network is in low link utilization, EEE allows systems on both
sides of the link to save power.
The
LREC3210PF is fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP,
UDP) Checksum features, and supports IEEE 802 IP Layer 2 priority
encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN).
The above features contribute to lowering CPU utilization, especially
benefiting performance when in operation on a network server.
The
LREC3210PF is suitable for multiple market segments and emerging
applications, such as desktop, mobile, workstation, server, communications
platforms, docking station, and embedded applications.
-
Fiber Port supports 1000Mbase-SX/LX standard;
-
Supports USB 3.0, 2.0, and 1.1
-
Supports LPM (Link Power Management)
-
Supports pair swap/polarity/skew correction
-
Crossover Detection & Auto-Correction
-
Supports Wake-On-LAN and 'RealWoW!'
(Wake-On-WAN) Technology (see note 1)
-
Supports power down/link down power saving
-
Transmit/Receive on-chip buffer support
-
Supports hardware CRC (Cyclic Redundancy
Check) function
-
Microsoft NDIS5, NDIS6 Checksum Offload (IPv4,
IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large
send v2) support
-
Supports jumbo frame to 9K bytes
-
Supports Full Duplex flow control (IEEE
802.3x)
-
Fully compliant with IEEE 802.3 and IEEE
802.3u
-
Supports IEEE 802.1P Layer 2 Priority Encoding
-
Supports IEEE 802.1Q VLAN tagging
-
Supports IEEE 802.3az-2010 (EEE)
|
Operating
System
+windows
xp 32bit/64bit
+windows
vista 32bit/64bit
+windows
7 32bit/64bit
+windows
8 and 8.1 32bit/64bit
+linux
Ordering
information:
|
Model
|
Product Name
|
Remark
|
|
LREC3210PF-SFP
|
USB3.0 Gigabit SFP Fiber NIC
|
LC Connector, exclude
SFP Module
|
|
LREC3210PF
|
USB3.0
1000Base-SX Fiber NIC (SC Connector)
|
SC
Connector, 850nm, 0.5Km
|
|
LREC3210PF-LX
|
USB3.01000Base-LX Fiber NIC (SC
Connector)
|
SC Connector, 1310nm, 10Km
|
|