Feature
1, bearing universal distribution group
Universally matchable bearings are specially processed, when the bearing is installed close to each other, any combination can achieve the established internal clearance or preload, and the average load distribution, without the use of shims or similar devices.
Paired bearings in: When insufficient load carrying capacity of a single bearing (using channeling associated configuration) or when to bear the combined load or the axial load in both directions (using back to back or face to face configuration).
2, the basic design of the bearing (not used for general distribution group), is used to configure the way the individual bearings
Single row angular contact ball bearings are designed for only one application of the basic configuration of the bearing at each location. Its width and the amount of outstanding ordinary level tolerances. Therefore not suitable for the two single-row angular contact ball bearings against the installation.

Application
1.Single row angular contact ball bearings: machine tool spindles, high frequency motors, gas turbines, centrifuges, small car front wheel, the differential pinion shaft, booster pumps, drilling platforms, food machinery, dividing head, fill welder, low-noise cooling tower, electrical equipment, painting equipment, machine slot board, welding machines.
2.Double row angular contact ball bearings: pump, blower, air compressor, various types of transmission, fuel injection pump, printing machinery, planetary reducer, extraction equipment, cycloid reducer, food packaging machinery, welding, soldering iron, square box, gravity gun, wire strippers, axle, test analysis equipment, chemical machinery.

Specification
1.Inside diameter:25mm
2.Outside diameter:52mm
3.Width:15mm
4.Cr:16.6KN
5.Cor:10.2KN
6.Grease lubrication speed:21000r/min.
7.Oli lubtication speed:28000r/min.
8.Weight:0.135kg