Function introduction:

The rotary evaporator is heated by water bath(oil bath) to form thin film under the negative pressure condition, evaporate highly, then condense and recycle the solvent simultaneously. The apparatus are particularly suitable for the heat-sensitivity material's condensation, crystallization, separation, recovery and so on. And reflux extraction can be avaliable for parts evaporator models. It is one of the necessary basic instruments in the chemical industry, pharmaceutical industry, universities and research laboratories and other units etc., while it is also the main means for producing concentrated extracts and analysis experiments.

The rotary evaporator is the essence of domestic and foreign similar products, and sets our company successful practical experience. We have developed 10 liters, 20 liters, 50 liters large capacity rotary evaporator. And the equipment's design follows efficient, practical, economic principles to meet customer's requirements maximally.

Features of Vacuum Rotary Evaporator:

 

1. GG17 borosilicate material glass

2. Water or oil bath

3. Build in vacuum controller

4. With digital display and frequency control

5. With vertical or diagonal condenser

6. Variable inclination angle of evaporating flask

7. Fitted and designed for controling and communication by PC

Technical data of vacuum rotary evaporator:

Model	RE1002	RE2002	RE5002
Rotary Flask(L)	10	20	50
Collecting Flask(L)	5	10	20
Motor Power(W)	120		180
Rotating Speed(R/min)	0-140
Evaporation Speed(L/H2O)	>3L/h	>5L/h	>9L/h
Condenser Cooling Surface(㎡)	0.57	1	1.5
Vacuum Degree	＜133pa(1.33mbar,1Torr,0.098Mpa)
Sealing Mode	PTFE Sealing System
Water Bath Configuration	Water bath lifting
Water Bath Power(kw)	3	5	9
Static Temperature Control Range	0-99(250)℃
Temp Fluctuation/Resolution	±1/1℃
Condenser	Vertical Double Condenser
Voltage	220V50HZ	220V50HZ	～380V50HZ