Raw materials:
Belt:high-quality Japanese neoprene(CR) or hydrogenated nitrile rubber(HNBR)as the main raw materials,
Skeleton materials: Japanese glass fiber cord
Belt tooth:nylon 66 for protection
clean, full profile, long life span, low noise characteristics.
Characteristics of automotive timing belt:
CR belt:
heat is good - can be at 120 ° c and below, the working environment and long-term use;
anti-aging is good - especially ozone-resistant properties must gifted;
good chemical stability: in addition to strong oxidizing acid, the chemical resistance of the general erosion;
great fire, water-resistant properties ;
HNBR belt:
oil resistance excellent - oil resistance with very low inflation, higher oil resistance;
durability good - dynamic performance than chloroprene rubber belt for the gifted, is the first choice in the luxury car drive belt;
wear properties gifted - wear than small chloroprene rubber belt to reduce the noise, effectively extending the life span of the belt
Belt:high-quality Japanese neoprene(CR) or hydrogenated nitrile rubber(HNBR)as the main raw materials,
Skeleton materials: Japanese glass fiber cord
Belt tooth:nylon 66 for protection
clean, full profile, long life span, low noise characteristics.
Characteristics of automotive timing belt:
CR belt:
heat is good - can be at 120 ° c and below, the working environment and long-term use;
anti-aging is good - especially ozone-resistant properties must gifted;
good chemical stability: in addition to strong oxidizing acid, the chemical resistance of the general erosion;
great fire, water-resistant properties ;
HNBR belt:
oil resistance excellent - oil resistance with very low inflation, higher oil resistance;
durability good - dynamic performance than chloroprene rubber belt for the gifted, is the first choice in the luxury car drive belt;
wear properties gifted - wear than small chloroprene rubber belt to reduce the noise, effectively extending the life span of the belt
|
Type |
Pitch |
Tooth height |
Belt thickness |
Type | Pitch | Tooth height | Belt thickness |
| R(MR) | 9.525 | 3.54 | 5.69 |
ZR |
9.525 | 3.20 | 5.40> |
| Y(MY) | 8 | 3.11 | 5.21 | ZAS | 9.525 |
2.32 |
4.62 |
| ZBS | 9.525 |
2.80 |
5.10 | ZB | 9.525 | 2.29 | 4.50 |
| YU | 8 | 3.109 | 5.20 | RHD |
9.525 |
3.50 | 5.70 |
| RU | 9.525 | 3.56 | 5.70 | RHX | 9.525 | 2.617 | 4.80 |
| ZA | 9.525 | 1.91 | 4.10 | RPP | 9.525 | 2.25 | 4.50 |
| FS8M | 8 | 3.05 | 5.30 | SL | 9.525 | 3.40 | 5.50 |
| ZD | 9.525 | 3.50 | 5.50 |
|
|
|
|
Automotive Timing Belt Mold List |
||||||||||||||||||
|
|
||||||||||||||||||
|
||||||||||||||||||