Single face corrugated cardboard making machine/single wall corrugating machine:
Width: 1600-3600mm
Corrugated roller diameter: 216-420mm
Working speed : 80-200 meter/min
Flute type: A,BC,C,D,E,F,G
Type: inner absorption or hood absorption

Characters of single-face corrugating machines:
1. Corrugated roller with diameter of 320mm is made from alloy steel 48CrMo and
ground accurately with heat treatment technology. It is plated with hard chrome on the
surface with surface hardness up to HRC 55-60.
2. Independent pneumatic sizing mechanism
3. Lubricated with high temperature grease
4. All paper lead shafts, preheating cylinders and forcing shafts are ground and plated
with hard chrome on the working surface.
5. The size roller is finely curved reticulate pattern with 24 wires/inch and plated with
hard chrome, allowing less amount and more eveness of sizing.
6. The driving part uses independent enclosed oil immersed gear case in the manner
of shaft drive.
7. Digital display of glue spread and electric adjustment thereof
8. Flute profile: UV
10. Variable frequency control of drive force
11. The outer facing preheating cylinder has a diameter of 415mm, and pressure
roller has a diameter of 320mm
12. Upper corrugated roller is mounted on a seat that is easy to dismount.
13. All rollers use straight-way stainless steel drainage device in their drain system,
providing independent draining, centralized retting and removed bypass design, which
can be free of maintenance for the whole service life, saving stop valve and check
valve, simplified installation and maintenance of the return circuit.
14. Steam pressure of 1.1-1.2Mpa, and water is discharged through a siphon
15. Provided with high pressure centrifugal fan, with a silencer

3 layer corrugated cardboard production line:
Our corrugated packing cartons production line is an automatically and continuously processed
line which can not only produce three layers corrugated pressing board, but also five and seven
layers. It can produce high quality cardboard and cutting as the requirement automatically. This
producing line has high efficiency and good quality, centralized control system is equipped to
result in easy operation, convenient maintenance and labor saving. The type of the line is include
the rhombic and dentiform one(UV/ACBE), you can chose two type heating system:
diat-hermanous oil, or steam type

Main technical specification of our corrugated cardboard production line:

Model: three layer corrugated cardboard production line
Max producing width:1600-3000mm
Working speed: 30-120m/min
Max height of equipment: about 3.8 meter
Length of equipment: about 50 meter
Power consumption: 200KW/hour
Heating type: transmitting heat oil or steam
Steam consumption: 2-2.5t/h

Model: five layer corrugated cardboard production line
Max producing width:1600-2500mm
Working speed: 50-120m/min
Max height of equipment: about 4.5 meter
Length of equipment: about 90 meter
Power consumption: 350KW/hour